Feature

●Semi-Tubular Rivet ; 5mm Shank Diameter, 25mm Shank Length; Aluminum
●Long length rivets can be applied without buckling or bending the rivet shank.
●Can be used to fasten similar or different materials of multiple work-pieces.
●Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole
●Rivets can also be used with a rivet cap to improve appearance of clinched end.


Description

Descriptions:

Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.
The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.
Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.
Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.

Specifications:
Material: Aluminum
Shank Diameter(D): 5mm/0.2inch
Shank Length(L): 25mm/0.98inch
Head Diameter(A): 9.5mm/0.37inch
Totally Length(L+T):27mm/1.06inch
Color: Silver Tone
Net Weight: 69g

Package Content:
50pcs(+/-2%) x Semi-Tubular Rivet