Product description:
Note:
This is just an audio amplifier accessory, not a finished audio,the microphone version is just a K song function, does not contain a microphone.
This new product does not take the power amplifier tube and integrated block, direct digital IC integration, power.
Features:
1. This amplifier board is mono, mono does not mean that only one speaker can be connected, and multiple speakers can be connected together (4-8 ohms within 30-150W total power), connected to the power amplifier board speaker cable! The speaker cable is a plug-in cable. It is not a soldering wire. It can be ringed when the speaker is connected. If the speaker has a binding post, please connect it to the terminal with a wire! (The binding posts are usually behind the speaker - red and black clips)
2. The amplifier board is built-in BT (no need for so-called BT stick, mobile phone BT connection can be used, boot default BTmode), Chinese prompt voice, the first connection to BT, the phone volume will automatically adjust to the factory volume, the phone volume Turn up to be able to note: BT has no call function,nbspcan install 6 inch 8 inch 10 inch (cylinder, tunnel, square) subwoofer!
3. Special Note:
The red and white sockets on this amplifier panel cannot be connected to other amplifiers for amplifier use (this connection is not feasible) and the satellite box audio head is used. The red and white sockets are only the audio input, if you have audio Line, then you can connect to mobile phones, computer hosts, DVDs, car CD players and navigation devices, you have to switch to the external audio mode by remote mode!
This amplifier board is recommended :30-150W 4-8 Ohm speakers and subwoofer!
Suitable for installation: 6-10 inch subwoofer DIY, 6-10 inch speaker. Home floor speaker. Stage sound.