Feature

●High pressure grouting pump is the use of mechanical high pressure, to inject chemical grouting materials to concrete cracks when the slurry quick disperses, emulsify, inflate, consolidate, the elastomer will fill all concrete cracks, which will be completely blocked outside the concrete structure, in order to achieve the purpose of the leakage of water stop.
●The electric high pressure injection pump is a professional machine used for high pressure chemical grouting, which works with single chemical grouting material.
●Power: 1100W，Maximum Output Pressure: 18000 PSI
●This grouting machine is used for concrete leakage repair in house roof, water pool, bank, reservoir, high bridge, underground parking lot, channel and so on.Convenient construction: it can improve the work pressure in a few seconds
●Light weight: Easy to carry and convenient to move.


Description

Power: 1100W
Maximum output pressure: 18000 PSI
Restart pressure: 7500 PSI
Safe range of high-pressure hose： 14000 PSI
Test the pressure of the machine.
It can produce high pressure itself when working on leakage-stop constructions. It is widely used on engineering, include architecture, underground, water conservancy, environment protection, civicism, subway, tunnel, culvert, crack reinforcement.
Easy maintenance: Can be maintained without special training, eliminating the possibility of downtime caused by mechanical repair.
It is the preferred equipment for waterproofing. It use a wide range of materials, such as polyurethane, epoxy, acrylic, and other liquid materials.
It is forbidden to test the working pressure with liquid without viscosity (toluene, acetone, water, etc.), and the pressure of the machine should be tested with lubricating oil such as engine oil. If it is empty, the pressure gauge will not show the pressure.
Test Method: Pour the lubricating oil into the material barrel of the machine, close the valve, point the gun out, and turn on the electric drill. When the pressure gauge shows a pressure of 300-400kg, turn off the electric drill, open the valve, and spray the lubricating oil back into the oil barrel. The pressure test is successful./:_ _ The pressure must be tested with the oil before the new machine is used for the first time. Remember, the above contents must be read carefully.