How to Use:
1. The pump can be installed in any position. If installed vertically, the pump head should be in a downward position to avoid leakage into the motor housing in case of failure.
2. Secure the legs, but do not squeeze them. Over tightening the set screws may reduce their ability to dissipate noise and vibration.
3. The air inlet hose must be at least 1/2in (13 mm) ID reinforced hose. The main distribution line at the pump outlet should also be 1/2in (13 mm) ID, and branch and independent supply lines to the outlet should be no less than 3/8in (10 mm) ID.
Specification:
Item Type: Self Priming Pump
Material: Engineering Plastic + Metal
Working Voltage: 12V
Operating Current: 6A
Pressure: 60PSI, 4.2BAR
Flow Rate: 18.9LPM, 5.0GPM
Maximum Peak Current: 15A
Drive Mode: Electric
Control Method: Pressure Switch
Operating Mode: Continuous Operation
Function:
With self priming function
Can run dry for a short time
Main Uses: Yacht water supply system pressurization, caravan water supply system pressurization, dynamic car water supply system pressurization, large electric sprayer, vehicle mounted sprayer, washing machine, heater, drinking fountain and other supporting equipment to be pressurized
Package List:
1 x Diaphragm Pump
1 x Instruction Manual
1 x Package of Accessories (3PCS)