Feature●??Material: Aluminum Alloy, Buna-butadiene Rubber, Drive Mode: Pneumatic, Max Flow Rate: 10n3/n, Head: 0-69m/ 0-226.38ft, Exit Pressure: 6.9kgf/cm², Sucked Lift: 5m/ 16.4ft, Max Grain Dia: 4.5mm/ 0.177in, Max Pressure: 7kgf/ cm², Consumption Max Air: 1.7m³/min, Max Air Consumption: 0.6m³/min, Pump Inlet: 1/2in, Pump Outlet: 4in●??The air-operated diaphragm pump has a high head of 69 m/ 226.38ft and a sucked lift of 5 m/ 16.4ft, which can complete more effective pumping work in a shorter time. It can flow spaciously and has good passing performance, allowing the passage of particles up to 4.5 mm/ 0.177in diameter, making it possible to pump a wide range of media, such as water and low-viscosity petroleum fluids, including diesel, kerosene, motor oil, and some waste oils. The large flow rate also saves you time and improves efficiency●??This air-operated diaphragm pump adopts a one-piece molding process and is made of high-quality aluminum alloy for greater sealing and durability. The pneumatic feature, which will not produce sparks heat when operating and makes it safer and more reliable. Equipped with a muffler, creating a quiet operating atmosphere. Suitable for construction, petroleum, chemical, pharmaceutical, electric power, water treatment and other fields●??Our Diaphragm Pump without rotating parts, and shaft seal, diaphragm pumping medium in the pumps moving parts, the working medium is completely separated, and the transported medium will not leak out, so when pumping toxic, easy-to-play or corrosive media, will not cause environmental pollution. Adopts a buna-butadiene rubber ball valve to give it good sealing while providing the best air efficiency ●??This pump has a simple structure, making it easier to install and maintain than other types of pumps. No need to irrigate and no need to use oil lubrication. And it has a self-protection performance, when overloaded, the pump will automatically stop, and after restoring normal, it can start running again automatically. And it does not require electricity so it can be used safely even in flammable and explosive situations Description
This air-operated diaphragm pump is suitable for water and low-viscosity petroleum fluids, including diesel, kerosene, motor oil, and some waste oils. It can be widely used in mining, pharmaceutical, construction, petrochemical, water treatment, etc.
Specification
Model: QBK-40L
Color: Silver
Condition: Brand New
Material: Aluminum Alloy, Buna-butadiene Rubber
Drive Mode: Pneumatic
Max Flow Rate: 10n3/n
Head: 0-69m/ 0-226.38ft
Exit Pressure: 6.9kgf/cm²
Sucked Lift: 5m/ 16.4ft
Max Grain Dia: 4.5mm/ 0.177in
Max Pressure: 7kgf/ cm²
Consumption Max Air: 1.7m³/min
Max Air Consumption: 0.6m³/min
Pump Inlet: 1/2in
Pump Outlet: 4in
Product Size: 34*16*47.5cm/ 13.4*6.3*18.7in
Package Size: 60*50*35cm/ 23.62*19.69*13.78in
Net Weight: 10kg/ 22.05lbs
Gross Weight: 11kg/ 24.25lbslbs
Package Included
1* Air-Operated Double Diaphragm Pump
1* English & Chinese User Manual
Notes
1. Please retighten all fasteners before operation.
2. Please note that case creep and gasket material may cause the loosening of fasteners, which need to be retightened to ensure there are no liquid or air leaks.
3. When cleaning, give priority to flushing the pump with a solvent that is compatible with the pump fluid.
4. Please read the user manual carefully before use. And pay particular attention to the safety instructions included.
5. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.