Everything You Need To Gold Plate Car EmblemsIncludes Gold Plating System, Chrome Stripper and Nickel ActivatorVideo: Title Using The Caswell Plug N Plate Brush Plating KitRead An Article From Mac Life Magazine On Plating An iPod Using Our Plug N Plate® Kits (372 KB PDF)Read the Instruction Manual Here Most car emblems are chrome plated plastic. This kit allows you to strip the chrome off, by reverse plating with the chrome stripper, which exposes the nickel plate that is under it. Activate the nickel plate with the included activator, then use the gold plating solution to plate the nickel.4 Simple Steps To Brush Plate Your Small Parts1. Plug In The Adapter2. Clip the Black Lead To The Part3. Soak The Wand With Bandage In the Solution4. Brush The Wand Over The Cleaned PartPlug N Plate® is a new concept in plating small parts. Our unique mains power pack supplies just the right amount of power allowing you to brush, and in some situations, dip plate your smaller components.The Plug N Plate® system will also allow you to patch repair areas where the original plating has worn away.Plug N Plate® is ideal for vintage vehicle restorers, antique collectors and dealers, and small workshops doing prototype work.What could be simpler? The Plug N Plate® wand is attached to the red plug on the Power Pack, and the alligator clip is attached to the work-piece. The end of the wand is covered in an absorbent bandage, which is soaked in the plating solution for a few seconds.By simply stroking the part with swift brush strokes, the circuit is closed and the plating metal bearing solution goes to work, depositing its beautiful layer onto the object.Plug N Plate® may be applied onto most metals. To see which kit plates onto which metal, read our instruction booklet.