[120*25cm 1500W]
Silicone Band Drum Heater,Metal Drum Heater,Oil Barrel Heater,Honey Barrel Heater,Butter Barrel Heater
Specifications:
Material: Silicone rubber
Temperature adjustment range: 30 ~ 150a/86 ~ 302a
Insulation material can withstand temperature: 250A°C
The actual operating temperature does not exceed: 200A°C
Product insulation: a¥300MI
Compressive strength: 1500v/5s
Power deviation: A±8%
Withstanding voltage:>5 KV
Power density: 0.1W/CmA²-1.5W/CmA²
Product thickness and specifications: conventional thickness 1.5-1.8MM
Internal process: The heating wire has a wire winding process and an etching process. The surface temperature difference of the wire winding process is 5-8A°C, and the etching process is less than 5A°C by default.
Scope of applicationi¼Suitable for metal bucket,Honey bucket,Plastic bucket,Paint bucket, Plastic and metal.
Size:
86 *20cm 800Wi¼
90*25cm 1200W,
120*25cm 1500W
152*25cm 2000W
174 *12.5cm 1000Wi¼
174*25cm 2000W
Packing included:
1 * Drum Heater Pad(barrel not included)
Note:
1.Select a suitable location to install the heater. The heater should be located below the lowest expected content level (typically the bottom 1/3) of the vessel.
2.Do not crush or apply severe physical stress on heater or cord assembly.
3.For plastic drums, the barrel heater is recommended to keep the thermostat set below 100A°F (37A°C).
Notice:
About color: The product picture is taken in kind, but due to lighting, display and other reasons, there may be a slight color difference, please understand
About size: The product size is measured manually, there may be an error of 1-2cm, please understand