Feature(may vary by option.)

●Great Suction Power and Cant Stuck: This powerful suction cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum can efficiently remove dirt, debris. Wheel Deflector for movement around tight corners and gets much higher up on the walls and stairs. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces. ( note: it doesn’t pick up leaves or anything like that.)
●Warm Tips: Please notice that this automatic wall climb cleaning requires at least a 3/4hp swimming pool pump or Minimum Flow of 6.5m3/hour/1700gal/hr. We recommend to adjust the weights and the regulator valve to get the best results for a clean pool.
●Save Your Time, Make Your Life Easier: Our pool vacuum provide a quick and easy way to clean your swimming pool. No jamming or breaking interrupting the cleaning process. It works amazingly for the dust, and it does the job that your expensive robotics vacuum does not and is very easy to maintain.
●Easy to Set Up and Efficient Cleanning and Super Quietly: This automatic swimming pool cleaner is very easy to put together, just make sure to read and follow directions and allows you to clean your pool effortlessly and quietly, mostly a stick or rock will get caught in the flapper,you just pull it out and it keeps going. Unlike some other automatic pool cleaners that make an annoying hammer noise. Low noise, create a quiet operate environment.
●Worry-Free Guarantee : One year warranty, if any part of this item broken you can contact us for a free replacement.We go above and beyond to provide the highest quality product. If you have any questions or concerns about your order,please keep in touch with us, we’ll always provide you a timely and satisfying solution.

[Gray]





Description

vacuumvacuum

vacuumvacuum

vacuumvacuum

Clean area note

In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool.

Cleaning type

The pool vacuum can clean algae, dirt and dust but can not clean leaves.

Underwater work

Just drop into the base of pool and the max deep is 9.8ft.

vacuumvacuum

hosehose

hosehose

hosehose

Product specification

Vacuum head, blue skirt and hose size display.

Accessories display

Comes with ten hoses, one weight, one regulating valve, diaphragm.

If the hose is too long or too short, you can increase or reduce hose.

Hose diameter

Each hose diameter is 1.96 inch.

There a special hose which need to connect to pool vacuum, and other hose neen to connect with that.

Ten hoses

Come with 10 hoses total 33 ft, each hose is 3.3 ft.

vacuum vacuum

vacuumvacuum

vacuumvacuum

vacuumvacuum

White little weight function

White little weight can keep balance when you clean the pool and seal the hose.

Grey disc installation

Need to install the grey disc counterclockwise.

No air in hoses

In order to get great usage effect, should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal.

Diaphragm

The diaphragm is silent and service life is 200 hours.

NOTE:

1.If the vacuum doesn’t work, please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.

2. If suction is too large or small, need to adjust the regulating valve.

3. If vacuum stop work when it reaches the surface of the pool,you need to adjsut regulating valve and adjust suction lower.

Problem: Cleaner is sluggish or has stopped operating.

Solution:

● Check if the pump is ON and / or primed.

● Check Cleaner head for blockages.

● Clean and empty pump basket and empty skimmer/weir basket.

● Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool pump as per manufacturers specifications.

● Inspect the regulator valve and flush away any debris build-up.

● Check the Mat for wear.

● Make sure the curved tips of the Mat are facing upwards.

● Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.

● Check the hose for blockage.

● Check the hose for leaks by lifting each section above water while pump is running.

● Consult a pool shop in your area.

Problem: Cleaner travels in a repetitive pattern.

Solution:

● Adjust return jets downwards.

● Verify proper hose length.

● Ensure cleaner sits flush with the pool floor. Adjust the position of hose weight if necessary.

● This should be done at the deepest part of the pool.

● Remove or add one hose section.

● Inspect the Regulator Valve and flush away any debris build-up. ● Check that the hose sections are straight; if not, lay hose in a straight line in the sun to relax the memory.

● Twist each hose section a half-turn at each connection point.