Feature
●Low Melting Point: 173℉(78℃), Flow Smoothly, Fast Melting Speed
●Work With Low-Melting, Which Can Protect The Chip Kit, SMD
●Suitable For Quick Removal Chip Kit, SMD, QFP, PLCC,SOIC, Under 300 degrees Fahrenheit
●Free Of Rosin Flux(Need To Use With Flux)
●Warning: This Product Contains Lead, A Substance Known To The State Of California To Cause Cancer Or Birth DE-Fects Or Other Reproductive Toxicity. For More Information, Go To WWW.P65WARNINGS.CA.GOV
Description
Product Description
|
|
|
|
|
|---|---|---|---|
Step 1Put A Few Solder Flux To The Leads Or Pins To Be Soldered On The Target Component. |
Step 2Start With A Soldering Iron To Melt The Chip Removal Alloy Onto The Pins Where You Applied The Flux. Take Care Not To Over Heat The Work Area If Necessary, Allow The Chip To Cool Before |
Step 3Move The Soldering Iron Around The Pins, Until All Solder To A Molten State, You Can Lift The Chip Now. |
Step 44. Used Solder Wick Braid To Clean The Remaining Solder Off The Pads And Clean Remaining Residue. |
Low Melt Solder for Removal Chip/SMD
- Use Our Cryogenic Alloys To Removal Chips ,it Can Protect Components
- Low Melting Point: 173℉(78℃), It Work With Low Melting, Which Can Protect The Chip Kit, SMD, Suitable For Quick Removal SMT, QFP, PLCC,SOIC, Under 300 degrees Fahrenheit
- Warning:This Product Contains Lead, A Substance Known To The State Of California To Cause Cancer Or Birth DE-Fects Or Other Reproductive Toxicity. For More Information, Go To WWW.P65WARNINGS.CA.GOV
