Feature

●Come with a nozzle cleaner, which helps to prevent nozzle clogging the next time.soldering sucker iron Tool is widely used for welding circuit board, appliance repair, Home DIY hobby, jewelry welding. You can take it anywhere and you will be able to find the tools you need in the carry bag
●The product have strong suction force, which is an ideal tin removal tool for thick film integrated circuits and large solder joints of large components.This desoldering tool for thick-film integrated circuits and large components with big welding joints.It pulls the solder right away leaving a clean solder pad.
●A good helper to improve work efficiency during maintenance. Automatic soldering is fast and convenient. it is a stand alone unit. Simply plug it in, let it warm up, and press the side button for suction.hollow tip design makes desoldering through-hole components a breeze
●Support to be used with one hand independently, and can be removed for a long time after 5 minutes of power on.Solder sucker Power source 110V 30W with US Plug let it warm up 5 minutes , and press the side button for suction Note :The item is not full-automatic, you need to use heating equipment together as assist
●Equipped with three specifications nozzles (0mm, 5mm, 2.5mm), easy for you to replace.This desoldering pump with Strong suction . hollow tip design makes desoldering through-hole components a breeze .


Description

Specification:
Item Type: Electric Solder Sucker
Material: Plastic + stainless steel
Model: BBT-580
Working Voltage: AC110V
Heater Power: 30W
Electromagnetic Power: 350W (momentary)
Insulation Class: E class
Working Method: Continuous
Product Category: Chip-level repair tools-motherboard repair tools
Equipped with three nozzles (approx. 1mm / 0.04in, 1.5mm / 0.06in, 2.5mm / 0.1in)
How to Use:
1. First connect the power supply and let the suction nozzle heat up.
2. It is ready to use after 5 minutes.
3. Put the suction nozzle on the part that needs to be removed from the solder.
4. When the solder is dissolve, the tin can be sucked out by pressing the button.
5. Press and hold the handle switch, remove it from the solder joint, and release the switch to automatically spray out the pot.
Total Length: Approx. 245mm / 9.6in
Machine Diameter: Approx. 32mm / 1.3in
Head Length: Approx. 85mm / 3.3in

Package List:
1 x Electric Solder Sucker
3 x Nozzle
1 x Nozzle Cleaner
1 x User Manual

Note:
When cleaning and replacing parts, you must turn off the power and wait for the tin pump to cool down completely.