Specification:
Item Type: IC Tester
Material: ABS
Battery: Polymers lithium battery 800mAh x 1 (shipping with built in battery)
Charging: Type C
Description
This device is developed with 800mAh built in lithium battery, with low power consumption, even lower than digital multimeter.
Press enter key can first turn on the power to automatically perform self test, after self test detect the battery voltage and display on the screen for more than two seconds, when the battery voltage is lower than 7v replace the battery to ensure the measurement accuracy. If there is no alarm you can start the measurement work. Native AD 10 AD, the theoretical resolution of 5v voltage is 0.0048v. Due to the use of battery power, it is not suitable for measuring high power thyristor. The Zener value should be based on the measured one, not just the nominal value. The default directory at startup is the search directory. An ordinary optocoupler can test up to a dozen parameters, the simple measurement of the logical relationship of the optocoupler is no longer of much practical significance, this machine can test the secondary saturation voltage of the optocoupler for reference. Test ordinary 4 pin optocoupler.
Equipment placement methods are as follows.
1. Place the chip and optocoupler on top of the alignment, with pin 1 aligned with pin 1 of the IC block.
2. Transistors in the three leftmost slots.
3. IC regulator put the seating 13, 14 feet.

Package List:
1 x Handheld LED Screen Display IC Tester
2 x Base