Feature(may vary by option.)

●[Specification] Claw material: Steel ; Repeated positioning accuracy:0.02mm; Dimensions: 102mm x 77mm x 50mm.This model can hold all non-ferrous metals
●[High quality material] The new self centering vise, whose jaws can be disassembled and replaced separately, has high hardness and good wear resistance, and is suitable for electrode processing and mechanical parts processing.
●[Large clamping range] Stroke: 35mm. After fine grinding, the surface of the fixture is smooth and flat. Small and portable, easy to carry.
●[Widely used] Precision milling and drilling vises are suitable for precision machining of milling machines, drilling machines and precision parts.
●[Product description] universal replaceable jaw, maximum screw torque: 70NM, holding force: 16KN, quenching, surface hardening treatment, connection plate can be made by ourselves, 3D drawing of product can be provided, and vise wrench can be sent.

[H77-160]




[H77 Soft Claw (Extended)]




[H77-L35]




[D52 Pull nails (8PCS)]




[H77-L60]




[D52-L]




[H77 Hard Claw]




[H77-L100]




[H77-120]




[D52-D]




[H77-85]





Description

H77 Hard claw

11

22

160160

H77-85

The clamping range is 6-85mm. This style can hold all non-ferrous metals. This model can hold all non ferrous metals

H77-120

The clamping range is 6-120mm. This style can hold all non-ferrous metals. This model can hold all non ferrous metals

H77-160

The clamping range is 6-160mm. This style can hold all non-ferrous metals. This model can hold all non ferrous metals

H77 Soft claw

3535

6060

11

H77-L35

You can add clamping jaws according to the workpiece, with a maximum opening of 35mm. This style can hold all non-ferrous metals.

H77-L60

You can add clamping jaws according to the workpiece, with a maximum opening of 60mm. This style can hold all non-ferrous metals.

H77-L100

You can add clamping jaws according to the workpiece, with a maximum opening of 100mm. This style can hold all non-ferrous metals.

..

..

....

H77 bottom diagram

  • H77 bottom hole bitmap, with a spacing of 52, can be installed with pull nails to match the quick change board, or self made connecting plates to connect the machine.

D52-D

  • D52 quick change board, purchased with 8 screws, T-blocks, dust covers, and pull nails required for free connection.

D52-L

  • D52 quick change board, purchased with 8 screws, T-blocks, dust covers, and pull nails required for free connection.

H77 style with three types of claw display.

160160

11

1111

Product information