Where to Install
1: If the pivot door is on the left side, insert the top pivot into the pre-drilled hole on the upper left side of the door panel.
2: If the pivot door is on the right side, insert the top pivot into the pre-drilled hole on the top right side of the door panel.
Note: We provide metal and plastic top pivots, and it is recommended to use metal top pivots. If the pre-drilled hole is a bit small, you can choose a plastic top pivot.
Step 2 - Insert the guide wheel into another pre-drilled hole at the top of the guide gate.
Step 3 - Insert the bottom pivot into the pre-drilled hole on the same side of the bottom edge as the top pivot.
Step 4 - Measure the position of the bottom bracket to correspond to the drilled hole for installing the top pivot. Screw the bottom bracket onto the corresponding door frame and floor.
Step 5 - Lift the door panel, turn the screw of the bottom pivot to adjust the height of the door. Insert the bottom and top pivots into the bottom and top brackets, respectively.
Step 6 - Adjust the upper bracket in the track and fix it with the screw on the upper bracket.