Feature

●Premium Zinc Alloy Construction: This Dent Repair Tool Kit is constructed from high-quality zinc alloy, ensuring it is rust-proof, impact-resistant, wear-resistant, and exceptionally durable. Its built to withstand the rigors of dent repair.
●simpleness and Speed: The kit boasts simple operation, allowing you to effortlessly and quickly repair dents without the need for extensive expertise. Say goodbye to time-consuming and complicated dent repairs.
●High Gasket Strength and Durability: The high gasket strength and hardness of these tools make them exceptionally durable. They are resistant to damage and breakage, ensuring they are reliable and reusable for a wide range of dent repair needs.
●Versatile Compatibility: Perfect for various dent types, including hail damage, this kit is compatible with all pulling glue devices like slide hammers and dent pullers. It offers comprehensive support for your dent repair projects.
●Wide Range of Applications: The Dent Repair Tool Kit is suitable for use in a variety of applications, including dent repair for solar panels, automobiles, motorcycles, washing machines, and more. Its a versatile solution for various repair needs.


Description

Specification: Condition: Brand New
Item Type: Dent Puller
Material: Zinc Alloy
Size (As Shown in Picture): Approx. 3.5cm / 1.4in, 3cm / 1.2in, 2.5cm / 1.0in, 2.2cm / 0.9in, 2.7cm / 1.1in, 3cm / 1.2in, 2cm / 0.8in, 3.2 x 1.6 cm / 1.3 x 0.6 in
Weight: Approx. 120g / 4.2oz

How to Use This Paintless Dent Repair Kit?
1. Clean the dent with a clean wet cloth;
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3. Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Package List: 8 x Dent Puller
Note: It is necessary to cooperate with the hammer, glue gun and glue stick to be used normally.