Feature

●Size: Rated Current: 1.5 A; Number of Phase: 2; Step Angle: 0.9 degree; Holding Torque: 0.45 Nm Typ.(Two phase on/rated current); Phase Resistance: 2.0 ohm; Phase Inductance: 4.9mH; Rotor Inertia: 87 g.cm²; Shaft Size: 20mm x 5mm/0.78 inch x 0.2 inch(L*D); D-cut Length: 18mm/0.71 inch; Size:42mm x 42mm x 39.3mm/1.65 inch x 1.65 inch x 1.55 inch(L*W*H)
●High Torque: Our extruder motor shell is made of steel material and is provided with high torque, low noise, have better high-speed performance.
●Low Resistance: The stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor, so effectively reducing the increase in temperature.
●Installation: The motor is supplied with a 90cm long power cable with a 4-pin female connector already fitted, ready to plug and work(4-wire: Black: A+, Green: A-, Red: B+, Blue: B-).
●Application: The small stepper motor can be used in various areas, such as 3D printers, stage lighting, textile machinery; placement machine, etc.


Description

Stepper MotorStepper Motor

Application

  • The small stepper motor can be used in various areas, such as 3D printers, stage lighting, textile machinery; placement machine, etc.