Feature

●Just the PCB and panel in case you already have all the other parts!
●One of the most versatile analog modules available.
●ONSET: Controls the positive rate (time) of change in voltage.
●DURATION: Controls the negative rate (time) of change in voltage.
●HEIGHT: Controls the held voltage level when a continuous gate is applied.


Description

Just the PCB and panel in case you already have all the other parts!

VCO, envelope, slew limiter (portamento), waveshaper, LFO, envelope follower… The EVENT does it all, making it one of the most versatile analog modules available.

Controls:

• ONSET: Controls the positive rate (time) of change in voltage. It has a bipolar CV input jack.
• DURATION: Controls the negative rate (time) of change in voltage. It has a bipolar CV input jack.
• HEIGHT: Controls the held voltage level when a continuous gate is applied.
• TRACK: 1v/oct input. It is particularly useful when patching the EVENT as a VCO.
• START: A simple gate/trigger/pulse input that initiates a cycle when the EVENT is patched as a voltage controlled envelope.
• SIGNAL input: Can be a constant or fluctuating voltage. This input is particularly useful for mangling CVs.
• SIG OUT: The main output, the result of the gate/trigger/pulse input or SIGNAL input.
• PLS DLY: A short pulse used for triggering other events as pulse delay (or as self trigger when patching the EVENT back into itself).

Specifications:

• Module width: 8HP
• Module depth: 22mm
• Current draw:
• +12V: 43mA
• -12V: 22mA