Feature●WIDE APPLICATION: High pressure air compressor is suitable for inflating on most DIY PCP air rifles, air pistols, paintball guns and HPA tanks. The compressor takes approximately 25 minutes to fill the 0.5L from 0 to 300 bar and 10 minutes from 200 to 300 bar●FAST INFLATION: The submersible compressor is driven by a 300W brushless motor and is capable of delivering pressures up to 4500Psi/30Mpa. Suitable for diving, outdoor, fire fighting, PCP aeration●QUICK CONNECTORS AND REPLACEABLE FILTERS: The PCP air compressor comes with an 8mm quick female threaded adapter, just connect and start pumping. Additional parts such as spare O rings and some moisture filter elements are included.●FAN COOLING AND REAL TIME TEMPERATURE DISPLAY: No oil operation, no cooling water circulation. The paintball air compressor has a built in 12500rpm cooling fan that is switched on and starts running when the air compressor is energized. Real time temperature display makes your air pumping safer and easier. No refill fees and no drive to the dive shop●BUILT IN POWER SUPPLY: PCP air compressor can be powered by DC12V car battery, easy to carry when going out.Description Specification:
Item Type: PCP Air Compressor
Pump Type: High pressure air(HPA) compressor(for drying compressed air only)
Maximum Inflation Pressure: 300BAR(4500psi/30MPa)
Maximum Inflation Capacity: 0.5L(500cc)
Inflation Rate(0.5L): 0-300BAR about 25 minutes
Compression Limiter: User chooses to close manually
Working Voltage: DC12V(can be powered by DC12V vehicle battery)
Cooling System: Fan air cooling
Filter System: Filter with replaceable drying medium and dust filter
Air Hose: For foster type 8mm quick connector available
Package Contain:
1 x Host
1 x Air Hose
1 x DC12V Line(for car batteries)
1 x User Manual
21 x Accessories
How To Use:
Install and use directly.
Note:
1. The temperature should not exceed 75°, and close promptly to cool.2. Please allow tiny size error due to manual measurement. Thanks for your understanding.