[Power Supply 220VAC]

General DV-DIN Digital voltmeter are designed to measure the voltage value between phase-phase or phase-neutral.

Usage and Working Principle
Make the connections according to the diagram.
The values between phase-phase or phase-neutral is shown on the display when the energy of product is being activated.

Maintenance
Switch off the device and release from connections. Clean the trunk of device with a swab. Dont use any conductor or chemical might damage the device.
Make sure device works after cleaning.

Warnings
- Please use the device according to the manual.
- Dont use the device in wet.
- Include a switch and circuit breaker in the assembly.
- Put the switch and circuit breaker nearby the device, operator can reach easily.
- Mark the switch and circuit breaker as releasing connection for device.

Specifications
Operating Voltage(Un).......: 140V - 270V AC
Operating Frequency..........: 50/60 Hz.
<;4VA
Operating Temperature.....: -20°C.....+55°C
Measurement Range..........: 10-500V AC
Measurement Precision.....: ±%1
Display.................................: 1x3 digit 9mm
Connection Type.................: Terminal
Cable Diameter....................: 2,5mm²
Weight...................................:Max.220gr.
Mounting..............................: vertical assembled in the panel or assembled on the rail.
Operating Altitude.............:
Wish you a very good time here！