Parts List:
1×100W Soldering Iron
2×Triangular Soldering Iron Tips
1×Sandpaper
1×Cutter Holder
1×Metal Brush
1×Hole Repair Net
20×PP White Welding Rods
20×PP Black Welding Rods
1×Screwdriver (Shipped Randomly)
Detailed description:
Product Name: Plastic Welder Kit
Material: ABS+Metal
Gear: 2 gears, high temperature (press the switch) and low temperature (release the switch)
Soldering iron size: 18×10cm/7.08*3.93INCH
Cable length: 1.1m/3.6ft
Color: Red
Plug Standard: US
Instructions:
1. Choose a suitable soldering iron tip. How to replace soldering iron tip: Remove the soldering iron tip fixing screw; pull out the soldering iron tip; replace with a new soldering iron tip; tighten the soldering tip fixing screw (first tighten the M3 screw, then the M4 screw). (Note: When replacing the soldering iron tip, unplug the power plug first and wait for the soldering iron tip to cool down before operation.)
2. Place the soldering iron on the soldering iron holder, and connect the power supply, the heating wire starts to heat normally, the working indicator light turns on, and it works after about 3 minutes.
3. When work is finished, put the soldering iron handle into the soldering iron stand, and unplug the power cord. When plastic melts, smoke will be produced, which may cause physical discomfort if inhaled. Ventilation measures must be taken and a protective mask must be worn before operation.
Maintenance and precautions:
1. Do not squeeze the soldering iron tip violently during operation, and do not hit objects with the soldering iron.
2. Remove the soldering iron head regularly and clean the oxide on the soldering iron head.
3. While the soldering iron head is cooling, use a steel brush to clean the plastic on the soldering iron head to keep the soldering iron clean.