Feature

●Sturdy Material: The main body of this product is made of high-quality 45# steel and its surface is treated with high-temperature baking varnish. It is sturdy, durable, and corrosion-resistant. You can use it for a long time.
●Safe and Reliable: The product is equipped with a water reservoir and pressure ring made of aircraft aluminum with an anodized surface, the high quality of the material ensures your safety and extends the life of the machine.
●High Efficiency: The water outlet is connected to a transparent water pipe and is accurately detected when the height of the water column corresponds to the meter display, which will take less time.
●Save Time&Money: With this instrument, you can measure the water pressure resistance of fabrics at any time and anywhere in the office, without spending time and large amounts of money in expensive laboratories.
●Easy to Carry: The length of this product is 9.92inch. It weighs less than 6kg/13.23lbs, so its lightweight and compact. It is easy and convenient for you to take to the workplace without much effort.


Description

How to Use

1. Remove any dirt from between the upper and lower pressure plates of the rubber ring before testing.

2. Loosen the airbag knob switch to the open position.

3. Fill the lower platen drain valve with an appropriate amount of clean water.

4. Place the test object between the upper and lower platens.

5. Then tighten the airbag knob switch to OFF and turn the handwheel to lower the upper platen until the upper and lower platens are completely sealed.

6. Repeatedly compress the airbag with the hand and observe the pressure gauge pointer at the specified value. Observe whether there is any abnormality on the surface of the test object while pressurizing. If not, continue to compress the hand-held air wrap until the pointer does not move, and then close the manual switch to observe the change in the pointer at this time. If the pointer does not fall back to change, the water pressure value is this value. If there is a fallback, after waiting for the pointer to stabilize to obtain the maximum water pressure value of the object to be tested When in the compression of the handheld air package found that the surface of the test object has the phenomenon of water seepage as well as the pressure gauge pointer does not go up, indicating that the test object water pressure is lower than the current pointer indication value.

Specification

Model: YJ-1200

Color: Blue

Material: 45# Steel, Aircraft Aluminium

Surface Treatment: High-temperature Baking, Anodising

Executive Standard: In Line with gb4744-84, But also in Line with iso-811

Measuring Range: Plastic Bags, Clothes, Tents, Raincoats, Cloth, etc.

Technical Parameters: The Sample Level is Placed, Under the Pressure of the Sample

Pressure Area: 100cm², d=11.28cm

Water Column Height: 0 - 10000mmH2O

Rising Speed: 10 ± 3mmH2O (Standard Rate) 60 + 20 mmH2O

Standard Rate: 100 ± 30 mmH2O (Increase Rate)

Sensitivity: 1mmH2O, Maximum Display Value 9999.9mmH2O

Gross Weight: 6kg/13.23lbs

Product Size: 17.2*25.2*28cm/6.77*9.92*11.02inch

Package Size: 30*40*38cm/11.81*15.75*14.96inch

Package Included

1* Waterproof Testing Machine

1* Water Pot

1* Pressurised Accessory

1* English Manual