Feature

●The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.
●Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
●Do not loosen the wire of fixed springs!
●When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
●quantity: 1pc

[54X10X0.8mm]

Description

Pay attention when installing springs.
Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.

Specification:
Material : Spring Steel
Finish : Chemical Blackening
Package Content :1 x Drill Press Spring

Size 1:
Material Thickness : 0.8mm
Material Width : 8mm
Spring OD : 49mm
Expand Length (about) : 1540mm/60.6inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook

Size 4:
Material Thickness : 0.8mm
Material Width : 10mm
Spring OD : 60mm
Expand Length (about) : 1540mm/60.6inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook

Size 5:
Material Thickness : 0.7mm
Material Width : 16mm
Spring OD : 61mm
Expand Length (about) : 1800mm/70.9inch
Inner Mounting Type : Hook
Outer Mounting Type : Ring

Size 6:
Material Thickness : 0.7mm
Material Width : 19mm
Spring OD : 71mm
Expand Length (about) : 1800mm/70.9inch
Inner Mounting Type : Cylindrical Bore
Outer Mounting Type : Ring

Size 7:
Material Thickness : 0.7mm
Material Width : 25mm
Spring OD : 44mm
Expand Length (about) : 1100mm/43.3inch
Inner Mounting Type : Cylindrical Bore
Outer Mounting Type : Hook

Size 8:
Material Thickness : 0.7mm
Material Width : 30mm
Spring OD : 45mm
Expand Length (about) : 1400mm/55.1inch
Inner Mounting Type : Cylindrical Bore
Outer Mounting Type : Hook