Feature
●【Material & Configure】- The spindle has fine workmanship, stainless steel body and dustproof design make the spindle more durable.
●【Cooling Method】- Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, its more convenient and trouble-saving and can be used directly by connecting with the inverter.
●【SPINDLE ADVANTAGE 】-It made less noise when working,Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
●【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD.
●【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB,plywood, nylon.
[Ceramic Ball Bearing 380v]
Description
1 & 220v AC 2.2kw ER20 Air Cooled Spindle Motor 80mm 4 bearings
1 80mm aluminum bracket
Size80x224mmMiddle body diameter 80mm x Length224mm)
Speed Ways:Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling:Air cooling
Power:2.2kw
Voltage:220v
Current:10A
Frequency:0-400Hz
Speed: 0-24000rpm
Runout Off:Less than 0.01mm
Diameter(mm):80
Bearing Type: 2 x 7005 P4 DT & 2 x 7002 P4 DT
4pcs fully sealed angular contact bearings
ColletER20
Clip diameter13mm12mm127mm11mm,10mm,9mm,8mm,7mm, 6.35mm,6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Water Cooling ER20 collet chunk
4 P4 angular contact bearings,2×7005C P4 DT&27002C P4 DTincrease spindle life
ER20 collet nutyou can use ER20 collet kits for it
Carefull assembly make the spindle more precisional
Runout off 001mmCoaxial degree less than 00025mm.
Better appearance, after a long time using,still looks like new.
1. Our Ceramic ball bearings spindle use 4 pcs ceramic ball bearings.
2. Ceramic ball bearings are resistant to high temperatures and low heat, usually 3-5 degrees lower than steel ball bearings during using .
3. Ceramic ball bearings have low friction, low noise and long service life.
4. If you want to use the spindle for aluminum, then ceramic ball bearings better than steel ball bearings.
Diameter: 80mm
Material:Cast Aluminium
Features:
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth,.
Cast aluminium fixture is much heavier than aluminiumprofile fixture