Feature

●Manual Control: The XYZ axes position can be manually adjusted as the starting point for engraving. The module can also manually control the spindle on or off mode.
●[Quality Service] If you have any questions about the product, please contact us at any time, we will offer you the best solution.
●[Specifications] This controller is an ideal replacement for 3018 PRO engraving machine offline controller.
●SIMPLE TO USE: The XYZ axes position can be manually adjusted as the starting point for engraving. The module can also manually control the spindle on or off mode. You just need to connect the offline module to the GRBL controller board and then you can use this module to control the CNC router.
●Simpler Access: After the file is put into the memory card, the engraving file can be directly recognized. You can also connect the offline module to a computer via a micro USB cable and store files directly.


Description

Specification:
Item Type: CNC Router Offline Control Module
Connection: USB, USB CH340.
Software: GRBL Controller, universal G Codes transmitter.
Input Voltage: 12-36V
Main Control Chip: For atmel 328P.
Stepper Motor Driver: A4988
Spindle Drive Chip: MOSFET, recommended 12-36V, within 10A.
Spindle PWM Speed Regulation: support
Support Stepper Motor: 12V, within 1.5A, it is recommended that the maximum current be less than 2A, stepper motor 42, 57.
Engraving: Supports
Power Interface: 5.5-2.5mm DC interface.

Package List:
1 x CNC Router Offline Control Module
1 x FC 8P Cable
1 x Memory Card
1 x Memory Card Holder
1 x User Manual

Note:
The router cannot be connected to the offline controller and the USB cable at the same time. Disconnect the USB cable from the router before connecting the offline controller.