1. Description of Function: This protection device can defend the alternating current power system from thunder or overvoltage.
2. Great Electrical Conductivity: protection device as an internal component, accurate chip, accuracy and strong conductivity is also a nice guarantee.
3. Flame Retardant: Enhances security in usage, flame retardant, and it can withstand greater work strength, improves performance, allows for an enhanced experience in usage.
4. Easy Installation: This protector adopts 2P rail mounting, which is very easy to install. Standard 36MM rail mounting, and distribution box circuit breaker with the use of.
5. Overvoltage Protection: When the system has a overvoltage due to strike of thunder or other reasons, the protector immediately opens quickly within nanoseconds and introduces the overvoltage to the earth protecting the power using devices.
Spec:
Item Type: Protection Device
Model: CHLT 40PV
Material: PC(Flame retardant)
Maximum Continuous Operating Voltage: DC600V
Nominal Discharge Current: 20kA (8/20μs)
Maximum Discharge Current: 40kA (8/20μs)
Voltage Protection Level Up: ≤2.8kV
Number of Poles: 2P
Protection Level: IP20
Working Temperature: -40℃ - 80℃
Working Humidity: ≤90%(at 25℃ on average)
packing list:
1 x 2P Protective Device
1 x Sliding Sheet
Notice:
1. The power supply must be cut off before installation, and operation with electricity is strictly prohibited.
2. When installation, please connect according to the installation diagram, where + is the positive line, ? is the negative line, do not misconnect, after installation is complete, close the automatic circuit breaker () switch, check whether the working state is normal.