Cayken SCY-18-2EBM 5in. Wet and Dry Core Drill Rig and 400F Stand

The Cayken 18-2EBM is designed for wet or dry core drilling and comes with the Cayken 400F adjustable aluminum stand. This drill will cut up to 5-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials This drill has a variable-speed motor with 2.5 HP and two gears. Spline is 16 mm x 2.0 and includes spline adapter. Drill features safety clutch and overload protection. Package includes 48 mm adapter collar to attached drill to stand, carrying case, wrench, two motor brushes, and 1/4-inch water valve with shut off.

Drill Specifications:

Brick Drilling Range: 5 in.

Concrete Drilling Range: 3 in.

Motor Specs: 2.5 HP, 110 V, 60 Hz, 1,900 W

Variable speed with Two Gears: 700 RPM; 1050 RPM

Spline: 16 mm x 2.0

Spline Adapter: 16 mm x 2.0 Box to 1-1/4 in. x 7 TPI Male

Weight: 11 lbs.

Features:

Designed for wet or dry core drilling.

Will cut up to 5-inch diameter holes.

1/4-inch water valve for wet drilling.

Stepless speed regulation.

Soft start electronic current limiter.

Includes 48 mm adapter collar to attach drill to stand.

Includes carrying case and wrench.

CE/ROHS/ISO90001 Certified.

Drill bit not included.

Stand Specifications

Adjustable aluminum stand for drilling at 0 to 45 degrees.

Built-in leveling bubble.

Four adjustable slide bearings.

Angle/vertical position locks.

Larger mast designed to accommodate large-diameter bits and withstand high torque.

Four leveling bolts on base.

Reversible slide handle for dual-side operation.

Top and rear handles.

4-1/2-inch rolling wheels.

Includes wrench set.