Product parameters:
1. Using embedded technology of single chip microcomputer;
2. Easy to use operation, can be fine-tuned by potentiometer;
3. Select a different input voltage range by short circuit;
4. The module is small, easy to carry and use;
5. Module working voltage: DC5V-12V;
6. Conversion range: 0-5V/0-10V voltage is converted to 0%-100% PWM;
7. Allowable error: 1%-3%;
VCC: Working power supply 5V-12V
GND: Working power ground
VIN: Input voltage 0-10V
GND: Input voltage ground
GDN: Output PWM ground
PWM: Output PWM
Operation instructions: Connect the working voltage to VCC and GND, and do not reverse the connection to avoid damage to the board and device.
A controllable voltage is connected to the VIN terminal, and the voltage range is divided into 0-5V and 0-10V according to the selected mode.
The PWM output is at the PWM side.
The duty cycle can be adjusted by adjusting the voltage.
Accuracy can be controlled by adjusting the potentiometer.
Packing: 1 piece * voltage to PWM module