WEN MM1011T 15-Amp 10-Inch Single Bevel Compact Sliding Compound Miter Saw with Laser, Black
Remember when your miter saw could do it all? Create cuts at any angle with the WEN 10-Inch Single Bevel Sliding Compound Miter Saw. Our powerful 15-amp motor slices through even the hardest of woods, rotating the blade up to 4500 times per minute. This versatile saw miters up to 45 degrees in either direction and bevels up to 45 degrees to the left. Cut boards up to 12 inches wide and 3-1/2 inches thick or make compound cuts (45-degree bevel and 45-degree miter) in boards 8-1/4 inches wide and 2-1/5 inches thick. The saw features 9 positive miter stops: two at 15 degrees, two at 22.5 degrees, two at 30 degrees, two at 45 degrees and one at 0. However, if a more unique angle is preferred, the miter lock still allows the saw to lock at any angle between those stops. This spacious saw also features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity. The compact design makes for great portability and storage between uses. Measuring in at 17.5 by 28 by 16.5 inches, you’ll never have to worry about your rail system interfering with your wall again. This package also includes a 10-inch 40-tooth carbide-tipped blade (w/ 5/8-inch arbor), two table extensions, one clamp assembly, a class II laser guide, a dust port adapter, and a dust bag. The onboard laser illuminates the line of cut for maximum accuracy while the dust collection port allows for connection to either the included dust bag or your dust collection device of choice. And, because it’s a WEN product, your miter saw comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.

WEN Miter Saw Stand, Collapsible and Rolling with 3 Onboard Outlets (MSA330)
Remember when you could adequately support both your miter saw and your work piece? With the WEN Collapsible Rolling Miter Saw Stand, you’ll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stand’s body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because it’s a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.