Switchable ±6dB or ±12dB boost/cut range
·Front panel bypass switch
4-segment LED ladder display for monitoring output level
·Signal dynamic range greater than 108dB
12dB per octave, 40Hz low-end cutoff filter
·±12dB input gain adjustment range
· XLR and TRS input/output connectors · 10Hz to 50kHz frequency response
Frequency response range: 20Hz~20KHz 0.5dB@+4dB, 600Ω
Total harmonic distortion: less than 0.05% (total harmonic distortion + noise), 20Hz~20KHz, 600Ω equalizer is in a flat state
Hum and Noise (Average Impedance: 600Ω, BPF: 20Hz~20KHz): -96dB Equalizer Curve Flat (0dB), Maximum Input Level
Balance Control: 31 Bands, 1/3 Octave
High altitude filter: 12dB/octave (20~200Hz~30dB point)
Power consumption: 131/215: 12W
Peak value display (LED display): When the post-EQ signal level is 3dB away from the peak stripping difference on each channel, the red LED indicator lights up
Signal display (LED display): When the post-equalization signal on each channel is lower than the normal level by 13dB, the green LED indicator lights up
Power requirements: AC110--220V, 50Hz60Hz
Power consumption: 25W