Feature

●The module can convert input 5V signal to 24V signal, or convert input 24V signal to 5V signal.
●It can also convert signal 5V to 5V, or 24V to 24V , and isolate input signal and output signal through optocoupler, which can improves anti interference ability of circuit.
●Input can be set by DIP switch, 24V output is NPN OC output, output current is 100mA.
●It has conversion and amplification circuit, good wave, strong driving ability.
●Compatible with a common cathode or common anode input connection, matching European and Japanese PLC interface standards.


Description

Description:
This converter is mainly used for PLC or MCU interface matching with other circuits, external circuit signal conversion circuit,or other conversion between control circuits.This module can convert 8 channel at the same time, using isolation chip of 10MHZ bandwidth, which can effectively guarantee speed and integrity of signal.

Features:
Compatible with AC/DC input power supply interface, designed with power indicator light. When output is selected as 24V , it is NPN OC output, with maximum 1A load capacity.24Voutput is OC output (NPN collector open circuit output), if you want to test output, it must add resistor, normally use a 10KR resistor. When converting signal to 24V , the power supply of input should be 24V. When converting signal to 5V , the power supply of input can be in between 7V 35V. You can use 4pcs M3 standoffs(not included) to install it.

Specifications:
Model: 8 5V24V D
Channel: 8 channel
Input: NPN or PNP, 5V or 24V squarewave signal
Output: NPN 5V or 24V squarewave signal
Size: 11*9*5cm/4.3*3.5*2in
Weight: 170g(approx.) Switch
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 Input 5V ON ON ON ON ON ON ON ON Input 24V OFF OFF OFF OFF OFF OFF OFF OFF

Package Includes:
1 x Converter

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.