Feature

●Recommended PCB hole 1.0mm
●A brand new terminal that has not been inserted and unplugged. The acceptable pin diameter is between 0.38 and 0.56 mm
●Once the maximum pin diameter is used for insertion and extraction, the minimum acceptable pin diameter of this claw spring hole will become larger (equal to the maximum pin diameter after insertion and extraction - rebound coefficient)
●For example, after inserting a 0.56mm needle into this socket, the minimum acceptable needle diameter will become 0.56-0.1=0.46mm, instead of 0.38mm of the new hole
●In short, after the jack is inserted and pulled out with a large pin diameter pin, the spring piece inside the jack will be enlarged, and the corresponding acceptable minimum pin diameter will be increased
●You can find the design drawing and detailed parameters of the terminal in the picture

[50]

Description

Recommended PCB hole 1.0mm
You can find the design drawing and detailed parameters of the terminal in the picture