QIUSUO Large Caliber Three Phase Clamp Power Meter Digital Power Analyzer with Current Range AC 0.00mA~1200A Resolution 0.01mA Clamp Size 80mm×80mm
(This Clamp Meter can measure leakage)
Technical specifications
Current Range: AC 0.00mA~1200A Resolution 0.01mA
Power Range: AC 0.5W~720KW Resolution 0.01W
Voltage Range: AC 0~600V Resolution 0.01V
Frequency Range: 25Hz~100Hz Resolution 0.1Hz
Phase Range: 0.0°~360.0° Resolution 0.1°
Power Factor Range: 0.3~1.0 Resolution 0.001
Power Energy Range: 0.0000KWh~72000KWh Resolution 0.0001KWh
Power Supply:6V DC(LR6×4 alkaline dry batteries, continuously working for 12 hours)
Working Current:50mA with enabled backlight; 25mA with disabled backlight
Weight:830g(with batteries)(but bateries are not included during the shipment!!!!)
Dimension:275mm×145mm×40mm
Clamp Size:80mm×80mm(Can clamp φ80mm wire, or 96mm × 4mm flat steel ground wire)
Sampling Rate:2 times/s
Frequency: 50Hz ,60Hz automatic identification
RS232 Interface: Data stored in the memory of the meter via RS232 upload to PC, wire length is 1.8m
Data Memory: 200units, FULL blinks when the memory is full
Data Hold: “HOLD” symbol appears
Overflow: “OL” symbol appears
Automatic Shutdown: Automatically shutdown about 15 minutes after power on to reduce battery consumption
Backlight: Controlled by “ * ”key
Line Voltage: Below AC600V
Gear Shift: Automatic shift
Accessories:Meter: 1 pcs; RS232 communication wire: 1 pcs; Disk: 1 pcs; Meter Box: 1 pc,Test line: 4 (1 each for yellow, green, red and black)