QIUSUO Leakage Protector Tester Residual Current Breaker Leakage Protector Device with Measurement Current 5~1000mA Time Range 0~999ms
Technical specification
Test Line Voltage:Below AC 600V; Relay protection switch test: below AC 250V
Rated Voltage:AC 220V
Leakage Current Grade:(5,10,15,20,30,40,50,60,100,150,200,250,300,500,600,1000)mA
AC Voltage Grade:0~600V
Leakage Current Initiating Time Range:0~999ms
Leakage Current Initiating Time Accuracy:5%rgt±3%dgt
Grade Current Accuracy:±10%rgt±5dgt
Grade Voltage Accuracy:±2rgt%±3dgt
Failure Information Indication:LCD display “999” over time indication, it is possible that the rated initiating current grade of tested is too small or the leakage protector is faulty
Test Wire Length:1.8M
Test Mode:Manual or automatic
Tester Dimension:215mm×178mm×83mm
Battery Voltage:When the battery voltage lower than 7.0V, low battery voltage symbol display, and remind to replace the battery. The measurement value is also accurate at this time
Working Current:365mA Max
Working Temperature:-10℃~40℃;below 80%rh
Store Temperature:-10℃~60℃;below 70%rh
Insulation Withstand Voltage:100MΩ or larger, AC 2KV/rms ( between shell and the screw)
Suitable Safety Standard:IEC1010-1,IEC1010-2-032,Pollution Level2,CAT Ⅲ(600V) IEC61326(EMC standard)
Accessories:Host: 1PCS; Probe test wire: 1PCS; Alligator clip test wire: 1PCS; Socket test wire: 1PCS; Instrument bag: 1PCS