JEFLYM UPGRADE GOLF CART MOTORCYCLES UNDERGLOW LIGHT BAR / OUTDOOR CAMPING LIGHTS
INSTALLATION METHOD 1: Directly connects a 12-volt LED Strip Light to your vehicles power wiring
Installation Steps:
(1) Find the correct on-board wiring location for the installation as well as the mounting location
(2) Wipe the mounting location with a damp cloth to ensure that the mounting location is free of dust and water.
(3) Split the car power line and the two connecting wires of the light bar, please follow the red for positive pole, black for negative pole connection way to connect
(4) Use flame retardant tape to wrap the light wire connections firmly.
(5) Tear off the self-adhesive tape on the back of the 12-volt strip, and stick the strip to the correct position after wiping it clean.
Installation Notes:
(1) in accordance with the correct way to connect the line after the light bar does not light, please do not worry, a very small number of cases, the black wire welded to the positive pole (+), the red wire welded to the negative pole (-), in this case, you just need to adjust the two wiring connection position can be bright!
(2) After installation, please make sure to put the connector in the cars wiring cover, long-term exposure to the outside is likely to cause a short circuit.
(3) If it is more convenient to take down the strip, you can use our free R-type wiring clips, which can fix the strip and very easy to take down without harming the reuse of the strip.
Wide Application:
It’s widly used for golf cart underglow motorcycles automotive car truck Cargo Trailer Camper-Vans underbody under the hood Interior footwell & exterior front grille,marine boat navigation lights bow lights, boat interior lights, fishing night light, cockpit light and boat stern lights, atmosphere light, etc.