1. Data Display: This electricity meter can display the measured AC voltage, current, frequency, power, energy and kWh, meanwhile the red and green LEDs are very clear to see.
2. High Measurement Accuracy: This single phase electric energy meter uses PC flame retardant materials and accurate chips, which are safe to use. The accuracy is 1% ± 2 bits, and the measurement speed is 2 times per second.
3. Reliable Testing: DIN rail power meter can display AC voltage and current at the same time. If the current is below 100A, simply pass the wire through the hole on the right side of the instrument to obtain AC current.
4. Data Storage and Resetting: When the meter displays energy, press and hold the SAM CK key for five seconds, and the meter will reset. Automatically save the electrical energy value and cumulative time electrical energy value when the power is cut off. After reconnecting the measurement power supply, the instrument continues to accumulate data.
5. Wide in Utility: This AC power meter has a built in transformer in its guide rail, which can meet the maximum load current of 100A. It can be used in fields such as schools, shopping malls, homes, industry, laboratories, etc.
Spec:
Item Type: Digital Power Meter
Model: SDM006
Material: PC
Measurement Accuracy: 1% ± 2 digit.
Display: 4pcs 0.32in red LED for AC voltage and power factor, 4pcs 0.32in red LED for active power and power frequency, and 5pcs 0.32in green LED for electrical energy.
AC Voltage: AC 80-300V
AC Current: AC 0-100A, the current display resolution is 0.01A when the measured current is less than 100A, 0.1A when the measured current is greater than 100A, and the range automatically switches.
Active Power: 0.0-30000W of AC 80.0-300.0V measured voltage.
Electric Energy: 0.000-999999kwh
Power Frequency: 45.00-65.00 Hz
Power Factor: 1.000-0.000
Measurement Speed: 2 times per second.
Installation: DIN Rail Type
Working Temperature: