Feature

●Feita 982 glue dispenser machine using 0.18CV constant flow solenoid control valve,with indicator switch,adjustable air suction device up to 15 inches / mercury (Hg). Service life could be more than 12 years.
●Precise control of dispensing drops and dispensing cycle, two Controlling Modes: manual mode & semi-automatic mode. Materials could be dispensed continuously until operator release the foot pedal when it is in the manual mode.
●The humanized function, simpler operation, easier coating, lineation and drop, highlight high-quality products,improve production efficiency.
●The professional precise glue dispenser be used the latest digital control system,digital display, assure timing output consistently.It need to be connected to air compressor (1.5HP or above)
●Feita automatic glue dispenser widely used on electronics, aviation, optics, chemistry, automobile, medical treatment, petroleum, packaging, jewelry and machinery industry.

[FEITA 982]

[FEITA 983]

Description

Feature:
Foot pedal controlled.
Free to set 16 kinds of ways.
Suck-back feature ensure no dripping.

Specification:
Power : AC 110V ± 10% / 50Hz
Power consumption : <8W
Air source : Maximum 0.99MPa ( clean dry air without lubrication )
Pressure adjustment range : 0.05MPa-0.99MPa
Time adjustment range : 0.01S--30S, the time available to a variety of modes
Function Mode : Manual mode / automatic mode
Vacuum features : adjustable negative pressure control to 600 mm Hg
Repeatability and spit Frequency: Accuracy : ± 0.05% Frequency: 600 beats / min
Minimum discharge rate : 0.01ml

How to use:
1. Power input socket, power Switch: putdown light on shows “On”, light off shows “Off”
2. Dispensing time : Scale knob switch adjustment
3. Input air pressure pressure governor: First pull out, Reversal is lower pressure,veering is the higher pressure
4. Barometer: display range: 0-100pSi
5. Vacuum control unit: Reversal is Vacuum pumpback high, veering is the Vacuum pumpback low
6. Testing button: During testing, it can replace the foot switch
7. Dispensing time : Scale knob switch adjustment display range 0.01S--30S, the time available to a variety of modes
8. Dispensing output interface: Connect to dispensing needle cylinder.
9. Air pressure input interface: Connect to clean high pressure source
10. Dispensing way: 16 kinds of free way
11. The foot controller interface: Connect to foot switch
12. Fuse holder

Package Included:
1 x Solder Paste Liquid Controller Dropper
1 x Dispenser Stand
1 x Hand Switch
1 x Foot Switch
1 x Power Cable
1 x Air Tube to Barrel
3 x 30cc Liquid Barrels
1 x Air Tube to Air Supply
1 x Steel & Plastic Tip Needles Set