Feature

●VACUUM BACK SUCTION - This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping and ensure a clean and tidy working environment.
●PRECISE DRIP - The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
●SEMI-AUTOMATIC DESIGN - It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
●HIGH-PRECISION AIR PRESSURE GAUGE - The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break.
●ANTI-IMPREGNATION DESIGN - It is equipped with high-quality electronic valves, with a certain anti-impregnation function, to better ensure operational safety and can also effectively extend the life of the semi-automatic glue dispenser machine.


Description

Specification

Color: Black

Model: 982

Material: Metal

Spitting Mode: Manual / Semi-automatic

Minimum Drip Volume: 0.01ml

Spitting Time Interval: 0.1-9.9s

Automatic Timing(Can Be Set): 0.01-30s

Repeat Accuracy: ±0.5%

Internal Voltage: 12-24DC

Input Air Pressure: 2.5-7bar(35-100psi)

Output Air Pressure: 0.1-5.5bar(1-78psi)

Power Supply: 110V AC, 60Hz

Power Consumption: 20W

Plug Specification: American Standard 110V

Product Size:23*15*6cm/9.05*5.9*2.36in

Package Size:20*26*14cm/10*9*12.5in

Gross Weight: 2.1kg/4.63 lbs

Package Included

1* Dispenser Main Unit

1* Manually Switch

1* Foot Switch

1* Air Tube

1* Connection Tube

1* Power Cord

1*Dispenser Stand

2* 30CC Liquid Barrels

6* Dispensing Needles

1* Chinese and English Manual

Notes:

1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.

2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.

3. Automatic state, the general air pressure adjustment in the machine at 1-2.7 bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation.