Feature

●-13 inch copper 2000W motor, high power, high efficiency, With handle for easy transportation
●-Automatic feeding, metal roller, simple operation, can process wood with a height of 160mm
●-The depth of planing can be adjusted, 0-3mm.
●-Can be matched with bracket, which can process 2m length of wood
●-Double dust exhaust mode, can be connected to vacuum cleaner


Description

Parameter:
Voltage: 220V
Rated power: 2000W
No-load speed: 8000r/min
Planing height: 10-160mm
Planing width: 330mm
One planing: 1-3mm
Base material: aluminum cast base
Packing size: 572*372*455
Weight: 30kg

Package include:
1x A set of planer

External carbon brush maintenance:
Note: The power must be turned off before replacing the carbon brush
1. There are two carbon brushes on the right side of the motor
2. Unscrew the screw and check whether the carbon brush is used up
3. Install carbon brushes

Blade installation
1. Disconnect the power supply and remove the four screws from the dust cover
2. Remove the blade
3. Install a new blade and use the tool holder to correct the blade position
4. Adjust the position of the blade to make the blade higher by 1.5mm, tighten the screw