Feature

●? HAND-HELD FLAT SURFACE AND CORNER SEAM TAPE APPLICATOR TOOL - Reduces taping time and increases accuracy when applying tape to various surfaces. *Only compatible with TitanRF Faraday Tape 2" width x 164 length rolls.
●? INCLUDES 3 LARGE ROLL OF TITANRF FARADAY TAPE - Kit includes 3 full rolls of TitanRF Faraday Tape 2" width x 164 length / 5.08cm x 50m (conductive adhesive tape with protective cardboard side walls and peelable backing), 3 sets of nitrile gloves (prevents residue from tarnishing the tape), 1 felt edge tape applicator hand tool (smooths out air bubbles and wrinkles), and instruction card. Multiple tape kit options available.
●?????? LAB TESTED & CERTIFIED TAPE?? ???? IEEE 299-2006 tested by Keystone Compliance Laboratory on October 7, 2020. *** Top rated shielding effectiveness confirmed with full test report. ***
●? EASY TO USE - Preferred tool for applying TitanRF Faraday Tape to surfaces, connecting multiple sheets of TitanRF Faraday Fabric, constructing industrial signal-proof rooms and tents, or other RF shielding projects. A trigger actuated cut-off blade slices tape free from the roll cleanly.
●? RETRACTABLE CREASING WHEEL - Taperator has a retractable creasing wheel for applying pressure evenly to flat surfaces or taping inside hard to reach corners seams.

[Taperator + 3 Tape Rolls]





Description

connect multiple sheets of TitanRF Faraday Fabric create industrial signal-proof rooms tentsconnect multiple sheets of TitanRF Faraday Fabric create industrial signal-proof rooms tents

Construct Your RF Shielding Project Using the Mission Darkness Taperator + TitanRF Faraday Tape

The Mission Darkness Taperator provides fast, easy, one-handed tape application for constructing RF shielding enclosures and projects. The Taperator is intended for use with the TitanRF Faraday Tape (2" width x 164 length rolls). Tape application without the assistance of the Taperator is typically off-centered, strenuous, and inaccuracies can result in RF leakage. The Taperator firmly applies tape to flat seams, and has a retractable creasing wheel for taping inside corners. The ability to switch between the flat and angled roller is a unique feature that allows the user to effortlessly and evenly apply tape to all wall areas. The trigger actuated cut-off blade slices the tape free from the roll of tape at the end of runs.

The Taperator is especially useful when connecting multiple sheets of TitanRF Faraday Fabric and creating industrial signal-proof rooms or tents (military, law enforcement forensics, construction company, EMF/EMI reduction, IOT developer, etc.). Additional applications include shielding electronic devices from RF signals, defense against EMPs, EMF radiation reduction, DIY consumer RF shielding cages and enclosures, data security, and to enhance digital privacy.

Mission Darkness Taperator provides one-handed tape application construct RF shielding enclosuresMission Darkness Taperator provides one-handed tape application construct RF shielding enclosures

The Taperator Reduces Taping Time and Increases Accuracy When Applying TitanRF Faraday Tape to Various Surfaces or Connecting Multiple Sheets of TitanRF Faraday Fabric

Creasing wheel is flipped up for flat surface tape application straight line wall surfaceCreasing wheel is flipped up for flat surface tape application straight line wall surface

Creasing wheel is flipped down for corner edge wall ceiling floor door seam tape applicationCreasing wheel is flipped down for corner edge wall ceiling floor door seam tape application

Hand-held tape applicator tool provides fast easy straight tape application to walls seams drywallHand-held tape applicator tool provides fast easy straight tape application to walls seams drywall

Flat Surface

Creasing wheel is flipped up for flat surface tape application.

Corner Seams

Creasing wheel is flipped down for corner seam tape application.

Clean & Even Tape Application

Pressure from creasing wheel creates clean and even tape application.

high-shielding conductive adhesive tape protective cardboard walls instructions printed on sidehigh-shielding conductive adhesive tape protective cardboard walls instructions printed on side

Compatible with TitanRF Faraday Tape ? 2" Width X 164 Length Rolls

TitanRF Faraday Tape offers the next generation of faraday shielding. It has been laboratory tested and certified to shielding effectiveness standards IEEE 299-2006 (see graph below). The high-shielding conductive adhesive tape is available in various dimensions, but the Taperator is ONLY compatible with 2" width x 164 length rolls. Reload the Taperator with fresh tape rolls as needed.

The tape roll has protective cardboard walls with instructions printed on the side. There is adhesive backing on the bottom side that gets removed as you apply it to the surface. The tape is extremely strong and cannot be removed easily once in place (may damage the fabric if removed).

If using with TitanRF Faraday Fabric, place the sheets together and overlap at least one inch. Center the tape, and adhere to the FRONT AND BACK SIDES to ensure a secure RF seal. Smooth out air bubbles or wrinkles in the tape.

Easy to Use & Reload

load taperator with titan rf faraday tape conductive adhesive peelable backing sticks to wallsload taperator with titan rf faraday tape conductive adhesive peelable backing sticks to walls

retractable creasing wheel apply tape evenly to flat surface corner seam edges walls ceiling floorsretractable creasing wheel apply tape evenly to flat surface corner seam edges walls ceiling floors

trigger actuated cut-off blade slices tape free from roll durable adhesive faraday materialtrigger actuated cut-off blade slices tape free from roll durable adhesive faraday material

1) Load the Taperator

The Taperator is only compatible with TitanRF Faraday Tape - 2" width x 164 length rolls. The protective cardboard rim holds the tape roll in place and displays application instructions.

2) Apply Tape to Surface

The creasing wheel remains up if applying tape to a flat surface. Flip the retractable creasing wheel down (against the tape) in order to apply pressure to a corner seam. Peel edge of tape backing and apply to surface. The roller produces smooth and even tape application.

3) Cut Tape at End of Run

The trigger actuated cut-off blade slices the tape free from the roll at the end of application. No need to use scissors.

Mission Darkness Taperator fast easy one-handed tape application construct RF shielding enclosuresMission Darkness Taperator fast easy one-handed tape application construct RF shielding enclosures

*Multiple Taperator Kit Options Available Based on Tape Roll Quantity Included!

Taperator kits include the following items:

  • TitanRF Faraday Tape 2"W x 164L / 5.08cm x 50m - Conductive adhesive tape with protective cardboard side walls and peelable backing
  • 3 sets of nitrile gloves - Prevents residue from tarnishing the tape
  • 1 felt edge tape applicator hand tool - Smooths out air bubbles and wrinkles
  • Instruction card

Select the appropriate based on your tape roll need.

  • ASIN: B08WVDHR17 - Includes Taperator + one 2"W x 164L TitanRF Faraday Tape Roll
  • ASIN: B08WVTDWYF - Includes Taperator + two 2"W x 164L TitanRF Faraday Tape Rolls
  • ASIN: - Includes Taperator + three 2"W x 164L TitanRF Faraday Tape Rolls
  • ASIN: B08WVP9DBL - Taperator only, no tape or accessories included

TitanRF Faraday Tape tested and certified to shielding effectiveness standards IEEE 299-2006TitanRF Faraday Tape tested and certified to shielding effectiveness standards IEEE 299-2006

TitanRF Faraday Tape Laboratory Testing, to Confirm Shielding Effectiveness Standards IEEE 299-2006

TitanRF Faraday Tape has been tested and certified to meet shielding effectiveness standards IEEE 299-2006. The shielding effectiveness test was conducted by Keystone Compliance, a full-service regulatory compliance laboratory offering solutions for nearly all EMC/EMI, environmental, ISTA-certified package and ingress protection testing requirements.

IEEE 299-2006 is the standard test method for measuring the effectiveness of electromagnetic shielding enclosures and materials. A properly-shielded device will effectively retain all RF energy in its faraday enclosure and keep all external RF isolated. The TitanRF Faraday Tape is advertised as a conductive material that can be used to isolate devices by blocking the frequency range most mobile devices and electronics transmit/operate within. To provide validation for this claim, the shielding effectiveness test measured how well the tape shields frequencies between 1.5GHz to 40GHz. The positive test results provides authentication of its shielding abilities.

Product information