Turn on the measurement interface, the system defaults to real-time measurement mode, and no mode is displayed on the screen. In this mode,
the displayed measured value will change along with the load.
Press the“PEAK" key, and the word“P”displayed on the screen is the peak mode. In this mode, the displayed measurement value is the maximum value. (When measuring again, if the measured value is lower than the previous maximum value, the displayed measured value will not change; if the measured value is higher than the previous maximum value, the displayed measured value will update and change.)
Press the“PEAK" key, and the words“P”and“T” are displayed on the screen at the same time is the first peak mode. In this mode, the instrument only displays the first peak value measured in a period of time, and lhe measured value will nol be displayed again. If lhere is a change;press the“ZERO"key to clear it before testing again.