Feature

●[PARAMETER] -- Max. load value: 500N/50kg/110Lb/1800Oz | Load value: 0.1N/0.01kg/0.01lb/1Oz | Accuracy: ±1％ | Power: 2pcs AAA battery (included) | 1 YEAR warranty and professional technical support
●[THREE MODES] -- Real-time / PEAK / First-PEAK. In "PEAK" mode, it can hold the maximum force applied shown on the screen.
●[AUTO SHUTDOWN] -- The tester can set the automatic power off time. The auto shutdown time can be set within 0-15 minutes, and the default time is 10 minutes.
●[LIMIT ALARM] -- The upper and lower limits can be set for statistical analysis, and the buzzer can alarm by setting the upper and lower limits beyond the set range.
●[MINIMUM FORCE SHIELDING] -- The gauge can set to shield the display of data below 0.5% of the full scale. This function can be cancelled, and the instrument defaults to enable the minimum force shielding function.

[100N]





Description

force gaugeforce gauge
force gaugeforce gauge

force gaugeforce gauge

force gaugeforce gauge

force gaugeforce gauge

WITH 2PCS BATTERY

Powered by two AAA batteries that come with each gauge.

WITH STORAGE CASE

Blow-molded storage boxes hold all the parts.

THREE MODES

Three measurement mode for selection (Real time, Peak, First peak).

force gaugeforce gauge

LCD Display

1. Battery level;

2. Real-time Mode: Turn on the gauge, the system defaults to real-time mode, and no indication is displayed on the screen. In this mode, the displayed measured value will change along with the load;

Peak Mode: Press the "PEAK" key, and the word "P" displayed on the screen is the peak mode. In this mode, the displayed measurement value is the maximum value; First Peak Mode: Press the "PEAK" key, the words "P" and "T" are displayed on the screen is the first peak mode. In this mode, it only displays the first peak value measured in a period of time;

3. Unit display;

4. Measurement force value display;

5. Push-pull force: the upper arrow shows the pulling force, and the lower arrow shows the pushing force.

force gaugeforce gauge
force gauge force gauge
Horizontal Test Stand Vertical Test Stand
Model APW Tension Test Stand APH Push Pull Test Stand
Stroke 220mm 220mm
Applicable Force Gauge ZMF / DL / ZP ZMF / DL / ZP
Mounting Holes 30*145 / 40*90 / 40*100 / 20*130 (mm) 30*145 / 40*90 / 40*100 / 20*130 (mm)
Clamps HJJ-001 Clamp x1 + Fixed Clamp HJJ-001 Clamp x2