Specification
Color: Black
Assembly Required: Yes
Mount Type: Floor Standing
Volume: ≤104dB
Material: Plastic, Aluminum, Iron
Engine Type: Air-Cooled Single-Cylinder 4-Stroke
Fuel: Pure Oil(#92/95)
Displacement: 38cc
Fuel Tank Capacity: 0.9L/38.04oz
Fuel Consumption Rate: ≤0.68L/28.74oz/kw.h
Impact Energy: 33J
Max. Power And Speed: 0.9kw/7500r/min
Impact Times: 1300-3000bpm
Max. Torque And Speed:1.2Nm/5500/min
Power Source: Gasoline Powered
Starter System: Hand Pull Start
Pile Head Size: φ45mm/1.77in, Max φ55mm/2.16in
Product Size: 30*30*63cm/11.81*11.81*24.8inch
Net Weight: 12kg/26.46lbs
Packing Size: 79.5*42*33cm/31.3*16.54*12.99inch
Notes
Please install and use it in strict accordance with the instructions, and pay attention to the safety precautions inside.
If the pile driver has the problem of not hammering, please check whether too much butter is added at the place where the butter is added, clean up the excess oil in the cylinder before disassembly, and add about 20 grams of high-temperature resistant butter again. And adjust the speed of carburetor. If the impact frequency is too high to hold, the impact frequency can be reduced. Otherwise, the impact frequency should be increased. Please note that this is fine tuning.
When the machine is not easy to start, pay attention to maintenance first. Add four-stroke oil into the tank and pure gasoline into the white tank. It is better to replace the fuel tank every day. The starting rope can be pulled out by one arm for two or three times, but this is also related to the temperature, sometimes it needs to be pulled several times. When the cold engine starts, close the damper (for good starting, open and start the warm engine), and open the damper after the machine is normal.