Feature

●Specification: Include 3 pressure gauge ranges: 0-25Mpa, 0-40Mpa, 0-60Mpa;10 stainless steel test couplings: G 1/4, Z 1/4,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/16, 9/16.
●Precise: G1/8 quick connector compatible for Caterpillar machines;Precise gauge set, reliable results.
●Feature: It can provide reliable pressure measuring results, very easy to connect and use. Stainless steel couplings, anti-rust, leakage-proof and better than those aluminum products on market.
●Complete Set: This is an accurate Excavator Hydraulic Pressure Test Kit. Set include: 3 x pressure gauge, 3 x test hoses, 10 x couplings and 1 x quick release coupling. Portable to carry with aluminum case.
●Wide Application: Test tube connects the gauge for direct reading;Wear-resistant tube, impact-resistant with good elasticity;Widely used at construction, machinery, shipping, mining, petroleum, chemical industry etc.

Description

Specifications of Hydraulic Pressure Gauge Kit

Pressure Gauge 1	φ60mm-3500PSI(250Bar/25MPa)
Pressure Gauge 2	φ60mm-5800PSI (400Bar/40MPa)
Pressure Gauge 3	φ60mm-8700PSI (600Bar/60MPa)
Connect Hose Length	1.6M / 5.25ft
Pressure Gauge Screw Size	G 4/1
Test coupling 1	G 1/4
Test coupling 2	Z 1/4
Test coupling 3	G 3/8

Test coupling 4	G 1/8
Test coupling 5	M 10*1
Test coupling 6	M 10*1.25
Test coupling 7	M 1/8
Test coupling 8	M 14*1.5
Test coupling 9	7/16
Test coupling 10	9/16
Quick Release Connector	G1/8

Kindly Tips for You

Should confirm that it is within range of the pressure gauge when the hydraulic system is running.

Place device flat and Not exceed 85% of the hose length between the measuring point and the device.

The measurement hose should be connected to the pressure gauge joint and pressure connector.

Wide Application

Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit

The ATPEAM Hydraulic Pressure Test Gauge Kit can be used widely in construction, machinery, shipping, mining, petroleum, chemical industry etc.