Feature

●¡¾SMD Design, Simple in Use¡¿ All the internal components have adopted SMD design, which greatly increases the stability of the VFD. Clear operation panel together with digital display allows for great viewing and convenient control. The extra large heatsink is also equipped with a low noise cooling fan, ensuring quick heat dissipation.
●¡¾Note 1¡¿ Before wiring, please confirm whether the input power is in power off state. For wiring work, please Ask professional electrical engineers to do it. The grounding terminal must be grounded. After the emergency stop circuit wiring is completed, be sure to check whether the action is valid. Do not connect the power cord to the output U, V, W terminals. Do not connect the contactor to the output circuit. During power on, do not change wiring and disassemble terminal.
●¡¾Good Material¡¿ VFD is made from flame retardant ABS material, this variable frequency drive is against impact. Premium mainboard enables good protection for 3 phase 380-440V input and 0-440V output.
●¡¾Note 2¡¿ Do not connect the output wire of the inverter with the shell, and do not short circuit the output wire. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the inverter. Do not perform withstand voltage test on the inverter. Please connect the braking resistor according to the wiring diagram. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power.
●¡¾Note 3¡¿ The inverter that selects the reset and retry function should not be close to the mechanical equipment, since it will restart suddenly when the alarm stops. After confirming that the running signal is cut off, the alarm can be reset. If the alarm is reset in the state of running signal, the inverter may start suddenly. Do not touch the terminals of the inverter since there is high voltage on the terminals, which is very dangerous. Do not modify the inverter without authorization.


Description

Specification:
Item Type: Variable Frequency Drive
Material: ABS
Storage Temperature: -25℃~+55℃
Input Voltage: 3 phase 380-440V AC.
Output Voltage: 3 phase 0-440V AC.

Package List:
1 x Variable Frequency Drive
1 x User Manual