Heat gun for crafts/epoxy resin/vinyl wrap/shrink pipe&PVC/wrapping/paint removal/thaw/ignite charcoal/welding wires/rusted bolt
Versatile heat gun can be used for a variety of tasks around the house.
Wide Application
- Shrinking/Wrapping/Crafting: vinyl wrap,tube,PVC,etc.
- Removing/Stripping/Bending: paint,rusted bolts, car,adhesive backed floor coverings,pipes,packaging Film,floor tile replacement,etc.
- Welding/Heating/Loosening/Drying/Thawing/Soldering: frozen pipe,frozen locks,seized bolts,etc.
- Waxing/Clearing/Repairing/Roofing: skis&snowboards,etc.
Notes
1.When the internal temperature of the heat gun is too high,the heat gun will start the overheat protection mode, automatically stopping the heating and restarting the heating when temperature returns normal.
2.The heating coil will glow, and may emit some smoke, this is because the new coil has a thin coating of anti-rust, and smoke will dissipate quickly. After using several times, the front tube will become darker, which is normal due to the high cycles.
3.Its normal when it is used for the first time, a small amount of glue contained in the built-in mica paper will dry up and produce slight smoke, the smoke will disappear after 10 minutes, which is normal and will not affect the use of the heating gun.
- The nozzle must be at least 2" (25 mm) from the surface being heated to permit adequate air flow and to prevent overheating, if the nozzle too near to surface overheating function will start on temperature in 221 ℉(105℃). it will normal heating when the nozzle distance at least 2" (25 mm) from the surface.
- Always use protective gloves, safety glass, respirator mask to protect yourself before using power tools
- Availability of water or fire extinguisher in case of a fire
- Dont use heat gun as hair dryer
- Dont aim the heat gun nozzle at person and animal
- Dont concentrate the tool to heat on window pane or other glass surface