Feature

●Hand drill length: 7.1inch,Chuck Clamping Range: 0.6-6mm, comes with a chuck key to screw the collet. Pin vise hand drill is wildly use for precision drilling.
●Drill bit diameter: 1.5/2.0/3.0/4.0/5.0mm,drill bits to meet your various.Drill bits are stored inside the unit itself as shown in the images.
●High Quality:Carbon steel hand drill & ABS plastic handle, nonskid and high hardness!easy and comfortable to grip. The hollow handle with a cap can be used to store tiny drill bits, which avoids missing and is more convenient.
●Wide Application:The pin vise set is ideal for drilling wood, resin, jewelry, walnut, amber, beeswax, olive nut, beads, PVC, acrylic and plastic, horn, olive, etc;not suitable for hard materials like stone, metal, glass,etc. When rotating the manual drill, feel the process and pleasure of creating handmade works.
●?This hand drill is small, light weight and portable, it can fit into many tool bags and you can take it anywhere. Note: This is a manual drill and must be rotated manually. Please contact us if you have any problem.


Description

Description:
?This hand drill is small, light weight and portable, it can fit into many tool bags and you can take it anywhere.
?Comes with a chuck key and 1.5/2.0/3.0/4.0/5.0mm drill bits to meet your various demands.
?The premium ABS handle not only can carry many drill bits, but also be skidproof and provide you more stability and strength!
?It can be used at a variety of materials such as wood, bodhi, bone, amber, olive nut, walnut and plastic.


Specifications:
Condition: 100% Brand New
Material: ABS(Handle) + Metal(drill bits)
Color: as Shown in the Picture
Suitable Material: wood, bodhi, bone, amber, olive nut, walnut, plastic, etc; not suitable for metal
Hand drill Length(handle and collet): approx. 17.5cm / 6.9in
Chuck Clamping Range: 0.6-6mm
Drill Bits Diameter: 1.5/2.0/3.0/4.0/5.0mm


Package Included:
1 x Hand Drill
5 x Drill Bits (1.5/2.0/3.0/4.0/5.0mm)
1 x Chuck Key

Note:
1. Does not apply to any metal.
2. It is a hand drill, which is no speed, no power and relatively lower stability, so it is not suitable for drilling in batches.
3. The drill bit with a diameter of 2mm or less is very thin. When clamping it, be careful to clamp it in the center of the three claws.
When drilling, pay attention and try to avoid hand shaking, otherwise it is easy to break the drill.