Feature
●[Automatic Plant Watering Kit] Its powered by solar energy, can take water directly from containers such as buckets, without the need for a tap. It can automatically water your plants at preset time intervals and amounts, and will automatically alarm when the water pump is idling or water shortage in the container. A perfet designed for balconies, patios, small gardens without faucet and fixed power supply.
●[Indoor&Outdoor Application] The water irrigation system is equiped with IP67 waterproof and sunlight resistance durable material. It can be used both indoors and outdoors. Fix the product in a position where the solar panel can be exposed to direct sunlight and the side with the switch button must be faced down. The product can be inserted into the soil by using the ground stake, or be fixed with screws on the wall, fence, etc..
●[Easy to Use with 6 Timer Modes] Press the MODE to select the watering frequency. Blue indicator light shows from left to right one by one according to your press. For the first light, it will water once per 12 hours for 5 minutes. Press the MODE again, the light will jump into the light 2, the system will re-time and will water as it selected. The watering flow is about 400ml/min, please select the number of drippers and the watering frequency according to your actual water demand of plants.
●[Automatically Alarm]The buzzer sounds twice a minute during the day. The green indicator light flashes without a beep at night. It’s maybe the water pump or the filter is blocked, please clean them. Or there is no water in the container, please add water. You can unclog the pump by injecting some warm water into the pump inlet with a syringe(not included). Please restart the product, and the system will perform a watering and re-time after the trouble shooting.
●[Long Vacation without worrying about plants] Its solar powered, and has the most power on the days water is needed most. It still functions after a few overcast days. 15-20 days duration after full charged. Just prepare a big container of water, select the watering frequency with the number of drippers. Then go for a happy long vacation.
●A professional after-sales service team helps you From installation to operation. Please check the package after receiving, and let us know if there is any missing. We can also send some extra replacement Accessories at our cost, if you need. NOTE：The Solar Drip Irrigation Kit Can Support up to 15 Pots, but the Standard Accessories Comes with 10 Drip-Stake. You can order The Expansion Kit or Extra Acessories Kit if you want to water plants up to 15 pots, or want to change a new DIY Setup.
[Expansion Kit & Extra Accessories Kit]
[Supported 10-15 Pots | 6Timing Modes]
Description
Solar Powered Automatic Drip Irrigation Kit
JIYANG Solar Powered Automatic Drip Irrigation Kit for Plants
Its powered by solar energy, can take water directly from containers such as buckets, without the need for a tap. It can automatically water your plants at preset time intervals and amounts, and will automatically alarm when the water pump is idling or water shortage in the container. A perfet designed for balconies, patios, small gardens without faucet and fixed power supply.
Features
1. Designed for balconies, patios, small gardens without faucet and fixed power supply.
2. Powered by solar energy, no need for additional wiring.
3. Taking water directly from containers such as buckets, without the need for a tap.
4. Auto watering at preset volume and time interval.
5. Audible alarm indicator for water shortage in the container.
6. Water tubing, T-Joint and Drip-Stakes are provided. You can layout as you need.
TIP--Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools.
Lightly soap end of selected T-Joint
Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb.
Press the MODE to select the watering frequency. The blue indicator light shows from left to right one by one according to your press. For the first light, it will water once per 12 hours for 5 minutes. Press the MODE again, the light will jump into the light 2, the system will re-time and will water as it selected. The watering flow is about 400ml/min ( Its alomost a bottle of watter. 500ml is a bottle water of 16.9 Fl Oz ). There is 10 meter of Water Pipe with10 Drippers as the standard accessories. Please select the number of drippers and the watering frequency according to your actual water demand of plants. Its very easy for you to DIY your own home automatic watering irrigation kit.
PACKING LIST
Solar Controller 1
Water Level Sensor 1
Water Filter 1
Tubing 10m 1
T-Joint 10
Drip-Stake 10
Ground Stake 1
Screw 2
Manual 1
Whats the Best MODE for my plants?
HOW TO INSTALL （You can put the Pipes into hot water for minutes, it does good help and make it easier to connect from drippers and the tees to the pipes.）
|
|
|
|
|---|---|---|
1. Solar Automatic Drip Irrigation KitASSEMBLE SUPPLIES · Water Tubing · T-Joint · Cup of hot water · Soap · Scissors · Towel |
2. Cut the Tubing into the Length as You Need2-1). Arrange plants at desired positions. 2-2). Lay Main Line tubing in front of plants 2-3). Mark plant positions on Main Line water tube section (tape or bread ties) 2-4). Cut tubing with scissors at plant location |
3. Connect the Tubing to the Water Inlet and Put the Water Filter into the water*Be certain your plant containers / trays are LARGE ENOUGH to contain the programmed volume of water and water spillover will not cause damage to surroundings. *Solar Pump dispenses approximately 8oz or 400ml per minute. A 5- minute cycle will dispense about 40oz or 2 liters of water divided among the plant Drip-Stakes. *Audible alarm indicator when the water pump or the filter is blocked. |
|
|
|
|
|---|---|---|
4. Connect anoter Tubing to the Water OutletTIP*- Hot water will soften end of water tube enough to fit over T-Joint barb and tighten as it cools. Lightly soap end of selected T-Joint Dip tube end in hot water 10 -15 seconds. Dry tube end and fingers. Use repeated pushing movements to fit warmed tube end completely over T-Joint barb. |
5. T-Joint to Tubing/Access to Drip-Stake5-1). Insert * T-Joints into Main Line water tubing at each plant position. 5-2). Arrange short Lateral Lines between water Main Line and plants. 5-3). Install end of Lateral Line onto Main Line T-Joint 5-4). Install Drip-Stake in other end of Lateral Line. 5-5). Insert Drip-Stake into plant Note: Tube ends must be completely over T-Joint barb |
6. Probe Connector/Put Water Sensor Probe into Water Container*Water Container must be below level of plants *Water Sensor Probe rests at bottom of water container. *Audible alarm indicator for water shortage in the container. |
|
|
|
|
|---|---|---|
7. Fix the Spin into Back of the Solar ControllerWays of Installation * Wall instabllation * Ground plug installation * Keep on table |
8. Plug in the soil, keep on table or hang to the wallNote: 8-1). Placing the plants above the water level to avoid siphoning. 8-2). Or adding anti-siphoning device to Water Outlet, then adding the tubing to water your plants. The air will be into tubing from the device, so that there wont be siphoning. 8-3). Solar Controller buttons must face toward the ground when installed. |
9. Press ON/OFF and MODE to Select 6 Timer Modes(Light will show from left to right accordingly)ON/OFF button - Program Start MODE button - Program Interval & Volume ? Blue LED on Solar Controller |
Go for a happy long vacation.
Its solar powered, and has the most power on the days water is needed most. It still functions after a few overcast days. 15-20 days duration after full charged. Just prepare a big container of water, select the watering frequency with the number of drippers. Then go for a happy long vacation.