Feature
●???【Super Adhesion and Safety】This excellent edge protector is made of innovative eco-friendly pvc material, which is non-toxic, non-slip, extra sticky, soft and highly elastic, not easy to deform and safe for human. Our edge protectors are the perfect gift for your baby.
●???【Soft and Transparent】The child safety edge protector size is 0.47in wide, 3.3ft long, 0.2in thick. Our baby edge protector are completely transparent to maintain the original appearance of the furniture while providing safety and protection for your baby and child. With a protective edge layer that will not tear easily.
●???【Lasts Long Time】The material of our table edge protector is improved to stick better and last longer on the furniture, not easy to peel off, 3 times more resistant to oxygen and less prone to yellowing. It is also easy to remove, does not leave marks and does not damage the furniture.
●???【Easy to Install and Remove】With the pre-installed adhesive strips, everything is easier and faster! Just peel off the protective film on the edge, stick it on a cleaned surface, press on and hold for 24 hours. Before removing, heat it with a hair dryer and tear it off slowly to prevent furniture from tearing.
●???【Suitable for Many Scenarios】Edge safety bumpers can be applied to home security guard, fireplace, tables, furniture, beds, kitchen units, bedroom, TV cabinets, stove and more, great for many kinds of furniture with different shapes at home or school, day care centers. NOTE?: Cement walls, white plaster walls and other uneven surfaces should not be used.
[0.6in x 20ft]
[32.8ft]
[Beige-1.6×1.6in width （6.6ft longth)]
[12 PCS]
Description
|
|
|
|
|---|---|---|
SafeThis excellent edge protection strip is made of an innovative PVC material that is safe for humans. |
High viscosityThe material of our table edge protector has been improved so that it adheres better and lasts longer on the furniture, and does not peel off easily. |
Highly transparentOur baby edge protectors are completely transparent to maintain the original look of the furniture. With a protective edge layer that does not tear easily. |
|
|
|
|
|---|---|---|
Free cuttingYou can cut the length of the bumper to your needs, so it is easy to use. |
Easy to cleanThe edge protector strip quickly and easily removes visible stains on the table and is easy to clean without yellowing. |
Removal without tracesEasy to remove without damaging the furniture. Before removal, heat it with a hairdryer and then slowly tear it off. |
Steps in the installation：
1. remove stains on the surface
2. pull off the adhesive tape
3. Apply to the desired place
4. Press back and forth a few times
Tips：
1. Installation Tips: Please clean the installation of dust and water stains and other impurities before installation, after installation, it is recommended that 12 hours after the sticky effect is better.
2. Gluing tips: Please mark in advance when installing to avoid repeated sticking, please do not touch with your hands, so as not to affect the adhesive effect!
3. How to remove: you can use a hair dryer to remove the adhesive and place heat slowly and tear it off, such as adhesive residue available hot towel with detergent to wipe it clean!
4. About the smell: high-quality material without any annoying smell, some smell may be formed during transportation, but it will be gone after a few hours of ventilation after receipt!
Please read in detail before purchase
Q1: Will the removal damage the tabletop?
A1: Normally it will not damage your furniture. However, if your furniture is covered with paper laminate or is prone to color fading, I would not recommend you to put it on this furniture because the adhesive is very sticky and you may damage the furniture.
Q2: How can I remove it without damaging the table or walls?
A2: If you want to remove it, do not tear it off directly. Please use a hair dryer or heat gun to soften the tape first (not too hot), then tear it off slowly to prevent the tabletop or wall from cracking. If for some reason there is still adhesive residue, we recommend rubbing it with a few drops of olive or vegetable oil or hot water and then wiping it off with a cloth. This may need to be repeated once or twice. We do not recommend the use of other solvents.
Q3: What materials are unsuitable for impact protection tapes?
A3: The table edge protector is suitable for clean and smooth surfaces. It is unsuitable for plaster surfaces, paper surfaces, diatomaceous earth, untreated wood, sink surfaces, and other uneven surfaces. If you have any of the above materials, I would not recommend you apply them on these pieces of furniture, because the adhesive is very sticky and you may damage the piece of furniture.