Feature
●Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. Put the gauge in the hole and screw down.
●12/24V Working Voltage, Red and Yellow backlights available
●Securely fasten the GPS antenna, preferably outdoors (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. Do not cut cable.
●OverSpeed Buzzer Alarm
●The gauge has the advantages of high precision, quick location confirmation and short start up time
[Black+Stainless steel]
[Black+Nickel Stainless steel]
[White+Stainless steel]
Description
Product Features:
-Suitable for all vehicles and off-road vehicles
-The signal comes directly from the satellite signal receiver(GPS Antenna), dont need other speed sensor
-The gauge has the advantages of high precision, quick location confirmation and short start up time
-IP67 waterproof and dustproof grade
-Reverse polarity protection and anti-fogging performance
-No Stationery Drift
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
Product Introduction
|
|
|
|
|---|---|---|
How to install it?- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. - Put the gauge in the hole and screw down. - For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable. |
GPS speedometer keeps counting?After installation in the first time, GPS speedometer needs to search for signal, thats the reason that LCD counts numbers all the time. After getting signal, LCD will come back to 0. It is normal. |
External button wiring?For the external button, one pin is connected to white wire of speedometer, the other to power negative/ground. |
How to change "BUZZ" ?
1. Press the button for 2-3 seconds first and then turn on the power supply.
2. Release the button after seeing “BUZZ”; Press the button to set up the target overspeed buzzer alarm threshold value.
3. After adjustment, release button first, then wait for menu to complete flashing.
4. Turn off the power supply, then turn on again. Odometer will record the setting.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 70Knots 80MPH | 80MPH 120km/h | 999(km/h, mph, knots available) | 70Knots 80MPH | 999(km/h, mph, knots available) | 999(km/h, mph, knots available) | |
| size | 85mm | 85mm | 52mm | 85mm | 52mm | 85mm |
| color | white+stainless steel | black+stainless steel | black+black | black+black | black+stainless steel | black+black |
| Indicating Range | 0-70Knots 0-80MPH | 0-80MPH 0-120km/h | 0-999(km/h, mph, knots available) | 0-70Knots 0-80MPH | 0-999(km/h, mph, knots available) | 0-999(km/h, mph, knots available) |
| adjustable odometer | no | no | no | no | yes | yes |
| Type | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer |
Package Includes:
1x GPS speedometer
1x GPS Antenna
1x Multi-plug socket
1x External Button
1x Installation Instruction