Feature
●【GREAT COMPATIBILITY】-- Perfectly fit for all Yamaha Suzuki Johnson Evinrude Hydraulic Trim/Tilt End caps, also suitable for All Seastar Hydraulic Steering End Caps.
●【EXCELLENT FUNCTION】-- Trim and Tilt hydraulic pin wrench, designed to safely, quickly and easily remove trim or steering caps without damage. Help to better resolving leaking issues.
●【HIGH STRENGTH PINS】-- MT0004 & MT0006 MIN Pin Strength is 180 ft-lb, MT0009 MIN Pin Strength is 200 ft-lb. Replace to Equivalent Yamaha Factory Toosl: YB-06175-2B, YB-06175-1A, YB-06548.
●【PACKAGE INCLUDE】-- Three of 1/2" socket drive, Pin Wrench with size of MT0004(38mm x 4mm), MT0006(32mm x 4mm/4.5mm) and MT0009(35mm x 6mm). Work with a torque wrench for proper installation.
●【SUPERIOR MATERIAL】-- Made of high quality 42CrMo Steel to ensure resistance to corrosion and rust,also show superior durability and impact resistance. Not easy deformation and not break, protection and years of trouble-free use.
Description
Yoursme MT0004+MT0006+MT0009 wrench set fits for ALL Yamaha Suzuki Johnson Evinrude trim and tilt end caps.
- Ultra High Strength stainless steel brings minimum 180 ft-lbs proof strength. Replaceable Pins are available.
- Also compatible with SeaStar Hydraulic Steering ends caps. If looking at a specific application measure the pin spacing and diameter!
- Operate easily, only makes both pin line up with the hole and insert, then work with 1/2" breaker bar.
MT0004
Feature
- Pins Size: S-4mm/4.5mm
- MIN Pin Strength: 180 ft-lb
- Tilt Pin Wrench: 1/2" socket drive
- Equivalent for Yamaha Factory Toosl: YB-06175-2B
Fitment
- All for SeaStar Steering Cylinders
- Trim and Tilt caps for ALL Four Stroke V6 (F200-F300)(3.3L, 4.2L)
- Trim and Tilt Caps for 2 strokes (225-300hp)(Non VMAX)
- Tilt Cap ONLY for 2011-Current F150
MT0006
Feature
- Pins Size: S-4mm/4.5mm
- MIN Pin Strength: 180 ft-lb
- Tilt Pin Wrench: 1/2" socket drive
- Equivalent for Yamaha Factory Toosl: MT0006 - YB-06175-1A
Fitment
- Trim Caps for ALL SHOWA manufactured Trim/Tilt Units
- Trim Caps for Yamaha F115-F150/ for ALL Yamaha I4 2.8L (F175-F200)
- Trim Caps for Yamaha 2-Strokes (115-225hp)/ for ALL Yamaha VMAX
- Trim Caps for All Suzuki Honda Johnson Evinrude
MT0009
Feature
- Pins Size: L-6mm
- MIN Pin Strength: 200 ft-lb
- Tilt Pin Wrench: 1/2" socket drive
- Equivalent for Yamaha Factory Tools: YB-06548
Fitment
- Tilt Cap for ALL SHOWA manufactured Trim/Tilt Units
- Tilt Cap for Yamaha F115-F150 (2004-2010)/ for ALL Yamaha I4 2.8L (F175-F200)
- Tilt Cap for Yamaha 2-Strokes (115-225hp)/ for ALL Yamaha VMAX
- Tilt Cap for All Suzuki Honda Johnson Evinrude
|
|
|
|
|
|---|---|---|---|---|
| MT0004 | MT0006 | MT0009 | 115225FS Seal Kit | |
| Pins | 6-4mm | 6-4mm | 3-6mm | 0 |