Feature

●Heavy duty all welded 316 stainless steel pontoon ladder.
●Stainless Steel 316 tubing * Telescopes and flips up *Rear Entry Ladder * Quick release mounting brackets.
●Re-usable securing Bungee Cord Strap holding ladder in stowed position.
●Ladder is constructed of 1.5" diameter. Steps telescope closed; flips up for easy storage; Comfortable 1.5" Wide steps. Hole Diameter: 1/4 ".
●Unique universal self supporting design requires no support. Weight capacity, 600-lb.
●Extra wide telescoping steps for more comfort when boarding. Extra tall, comfortable handrails for easy boarding.
●Notice: Please dont lock the nut too tight, because if the nuts are locked too tightly, which may cause the ladders two tubes not being parallel or not extend or retract properly. (we are using the nylon nuts, please dont worry about it falling off.)


Description

SIZESIZE

Specification：

  • Ladder is constructed of 1.5" diameter thick 316 stainless steel .
  • Comfortable Wide steps and Slip-proof Plastic Tread .
  • Handle Height from Mounting Plate: 9"(230mm) .
  • Ladder Length (extended): 46" (1175mm); Ladder Length (folded): 16" (415mm) .
  • Overall Ladder Width ID: 14" ; Overall Ladder Width OD: 16" (410mm) .
  • Distance to first step: 12.7"（325mm） ; Distance Between Steps: 11"（280mm）.
  • Mounting Hole Diameter: 1/4" .

Features of the 4 Steps Pontoon Boat LadderFeatures of the 4 Steps Pontoon Boat Ladder

Features:

  • Heavy duty ALL WELDED 316 stainless steel pontoon ladder;
  • Unique universal self supporting design that requires no tube support/stand offs;
  • 4 wide steps that telescope for a nice clean look;
  • Extra tall handrails for easy boarding,produced by OEM boat builders;
  • Weight capacity: 600-lb;
  • Easily mounts to deck Flips up;
  • Rear Entry Ladder.

Worth Choice:

EASY TO MOUNTEASY TO MOUNT

Easy to storeEasy to store

A slip-proof plastic treadA slip-proof plastic tread

Easy to Assemble

  • Easy to Assemble;
  • Installation is very easy,simply install the ladder to horizontal platform.

Easy to Store

  • Can be folded for storage;
  • A Detachable Ladder;
  • Extra tall, comfortable handrails.

Safe and Non-slip

  • Slip-proof plastic tread;
  • Reusable securing Cord Strap.

How To Mount

  1. Choose the most suitable side of your transom platform for mounting the ladder.
  2. When mounting, locate a place where the ladder will not interfere with the turning of the motor or be near the propeller of your craft.
  3. Position the mounting bracket with the ladder in the area to be attached.
  4. Mark the bracket’s eight mounting holes onto the deck surface.
  5. Drill the eight marked holes with a suitable drill bit. NOTE: It is recommended to through-bolt this ladder for a secure installation
  6. Mount the ladder in place by holding bracket up to platform and inserting mounting screws. Secure ladder in place with fasteners.

Security Guide

  • No jumping or diving!
  • Do not use when motor is running
  • This ladder designed for boat use only
  • Face ladder when entering boat or water
  • Only one person on ladder at a time
  • Check all steps and hardware before using
  • Never operate your boat with the ladder in “down” position. Serious injury, or damage to your boat or ladder may result.

More Products:

boat deck ladderboat deck ladder

LED Blue cup holderLED Blue cup holder

4 racks rod holder4 racks rod holder

Oarlock SocketOarlock Socket

B08S8W32DP

COC-LF Stainless Steel in-Board Swim Fiberglass Platform 4-Steps Ladder Welded Reinforce Folding Docking Ladder, Folding Telescoping Rear Entry Inboard Ladder

B093R5X23L

COC-LF 4 Pcs Blue LED Stainless Steel Cup Drink Holder with Drain & LED Marine Boat Rv Camper

B08S9GN9WG

COC-LF Wall-Mounted 316 Stainless Steel Rod Holder 4 Tube Fishing Pod Rack for Marine Boat Yacht Camper RV

B093RC8P6Q

COC-LF Boat Stainless Steel Rowlock Side Mount Line Oarlock Socket Marine Yacht (2 Per Pack)

Looking for specific info?